一看就会：超简单的路由rip协议实验

一看就会：超简单RIP路由协议实验

一.实验环境

实验环境：GNS3，C291路由器

二.实验拓扑图<img src="C:\Users\mc\AppData\Roaming\Typora\typora-user-images\1571557985394.png" alt="1571557985394" style="zoom:67%;" />

三.实验步骤

首先我们要分别对R1，R2，R3的端口进行ip设置。设置分别如下图。<img src="https://cache.yisu.com/upload/information/20200309/33/53627.jpg" alt="mark" style="zoom:75%;" />

<img src="https://cache.yisu.com/upload/information/20200309/33/53628.jpg" alt="mark" style="zoom:75%;" />

<img src="https://cache.yisu.com/upload/information/20200309/33/53629.jpg" alt="mark" style="zoom:75%;" />

然后对pc机进行配置，如图<img src="https://cache.yisu.com/upload/information/20200309/33/53631.jpg" alt="mark" style="zoom:75%;" />

<img src="https://cache.yisu.com/upload/information/20200309/33/53632.jpg" alt="mark" style="zoom:75%;" />

现在pc机去ping肯定是不通的，接下来我们就要去给路由器配RIP协议。我们先给R1配置。<img src="https://cache.yisu.com/upload/information/20200309/33/53634.jpg" alt="mark" style="zoom:75%;" />

剩下两个路由器配置方法和R1一样。<img src="https://cache.yisu.com/upload/information/20200309/33/53635.jpg" alt="mark" style="zoom:75%;" />

<img src="https://cache.yisu.com/upload/information/20200309/33/53636.jpg" alt="mark" style="zoom:75%;" />

目前为止，rip协议配置成功。三台路由器的直连接口可以相互学习，现在三台pc机可以互通了。over！