注意：本文档操作系统环境以Linux为主，假设要恢复金融数据库；
本文当主要以数据库恢复为主,操作系统安装、数据库安装配置和NBU客户端安装配置忽略；
1. 确定要恢复的数据库信息，如果数据库和操作系统可以正常访问，则可以登录数据库和操作系统查看和恢复信息相关的信息，如果数据库甚至是操作系统不可访问，则可以参考《oracle数据库信息收集》文档，里面记录了oracle数据库恢复的相关信息；
2. 为了确保恢复后的数据库可以尽快使用，尽量减少应用程序的修改，恢复完以后修改主机IP地址和原数据库地址保持一致；
1. 根据《oracle数据库信息收集》文档，安装操作系统和数据库软件，其中操作系统的版本尽量相同，数据库版本则需要一致；
2. 根据《oracle数据库信息收集》文档，挂载合适的存储，主要是存储的大小，所挂载的存储不可小于要恢复的数据库总容量大小，并配置合适的ASM磁盘组，磁盘组的大小和名称建议原来一样，磁盘组的容量可以大于原磁盘组；
3. 在客户端安装好NBU client，并保证通过NBU client可以正常访问备份文件；
在操作系统上执行如下命令：
/usr/openv/netbackup/bin/bplist -C fxzmd -t 4 -l -R /
列出数据库备份信息，部分信息如下：
-rw-rw---- oracle oinstall 12058624 Aug 26 2014 /c-1492422082-20140826-02
-rw-rw---- oracle oinstall 11796480 Aug 26 2014 /cntrl_365_1_856616015
-rw-rw---- oracle oinstall 12058624 Aug 26 2014 /c-1492422082-20140826-01
-rw-rw---- oracle oinstall 262144 Aug 26 2014 /al_363_1_856615969
-rw-rw---- oracle oinstall 45088768 Aug 26 2014 /al_362_1_856615942
-rw-rw---- oracle oinstall 52166656 Aug 26 2014 /al_361_1_856615942
-rw-rw---- oracle oinstall 12058624 Aug 26 2014 /c-1492422082-20140826-00
-rw-rw---- oracle oinstall 10640128K Aug 26 2014 /bk_358_1_856615605
-rw-rw---- oracle oinstall 9893632K Aug 26 2014 /bk_359_1_856615605
-rw-rw---- oracle oinstall 12058624 Aug 25 19:19 /c-1492422082-20140825-02
信息说明：
cntrl_365_1_856616015 表示控制文件
c-1492422082-20140826-01 表示参数文件
al_362_1_856615942 表示归档文件
bk_359_1_856615605 表示数据文件
c-1492422082-20140826-01 表示dbid
本文档选取 c-1492422082-20140826-02作为恢复对象，设置数据库DBID，并把数据库启动到nomount状态：
[oracle@FXZMD ~]$ rman target /
Recovery Manager: Release 10.2.0.5.0 - Production on Tue Aug 26 12:47:21 2014
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database (not started)
RMAN> set DBID=1492422082
executing command: SET DBID
RMAN> startup nomount
startup failed: ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/app/oracle/product/10.2/db_1/dbs/initREPORT.ora'
starting Oracle instance without parameter file for retrival of spfile
Oracle instance started
Total System Global Area 159383552 bytes
Fixed Size 2094736 bytes
Variable Size 71305584 bytes
Database Buffers 79691776 bytes
Redo Buffers 6291456 bytes
RMAN> run {
2> allocate channel c1 type 'SBT_TAPE';
3> send 'NB_ORA_SERV=NBUServer,NB_ORA_CLIENT= FXZMD';
4> restore spfile from 'c-1492422082-20140826-02';
5> release channel c1;
6> }
using target database control file instead of recovery catalog
allocated channel: c1
channel c1: sid=35 devtype=SBT_TAPE
channel c1: Veritas NetBackup for Oracle - Release 7.5 (2012020801)
sent command to channel: c1
Starting restore at 27-AUG-14
channel c1: autobackup found: c-1492422082-20140826-02
channel c1: SPFILE restore from autobackup complete
Finished restore at 27-AUG-14
released channel: c1
RMAN>
Spfile
SQL> create pfile='/home/oracle/initfxzmd.ora' from spfile;
File created.
编辑pfile：
根据$ORACLE_BASE、$ORACLE_HOME创建相应的目录：
mkdir –p /app/oracle/admin/fxzmd/adump
mkdir –p /app/oracle/admin/fxzmd/bdump
mkdir –p /app/oracle/admin/fxzmd/cdump
mkdir –p /app/oracle/admin/fxzmd/udump
关闭数据库：
SQL> shutdown immediate
ORA-01507: database not mounted
ORACLE instance shut down.
用新的pfile启动数据库到nomount：
SQL> startup nomount pfile='/home/oracle/initfxzmd.ora';
ORACLE instance started.
Total System Global Area 4.2446E+10 bytes
Fixed Size 2174824 bytes
Variable Size 3422552216 bytes
Database Buffers 3.9007E+10 bytes
Redo Buffers 14602240 bytes
SQL>
创建spfile：
SQL> create spfile from pfile='/home/oracle/initfxzmd.ora';
File created.
关闭数据库并启动数据库到nomount状态：
SQL> shutdown immediate
ORA-01507: database not mounted
ORACLE instance shut down.
SQL> startup nomount
ORACLE instance started.
Total System Global Area 4.2446E+10 bytes
Fixed Size 2174824 bytes
Variable Size 3422552216 bytes
Database Buffers 3.9007E+10 bytes
Redo Buffers 14602240 bytes
SQL>
[oracle@bridge ~]$ rman target /
Recovery Manager: Release 10.2.0.5.0 - Production on Wed Aug 27 14:40:44 2014
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: fxzmd (not mounted)
RMAN> run
2> {
3> allocate channel c1 type 'SBT_TAPE';
4> send 'NB_ORA_SERV=NBUServer,NB_ORA_CLIENT=FXZMD';
5> restore controlfile from 'cntrl_365_1_856616015';
6> release channel c1;
7> }
using target database control file instead of recovery catalog
allocated channel: c1
channel c1: sid=870 devtype=SBT_TAPE
channel c1: Veritas NetBackup for Oracle - Release 7.5 (2012020801)
sent command to channel: c1
Starting restore at 27-AUG-14
channel c1: restoring control file
channel c1: restore complete, elapsed time: 00:00:52
output filename=+DGROUP1/fxzmd/controlfile/current.256.856708891
Finished restore at 27-AUG-14
released channel: c1
RMAN>
启动数据库到mount状态：
RMAN> alter database mount;
database mounted
恢复数据文件：
RMAN> run
2> {
3> allocate channel c1 type 'SBT_TAPE';
4> allocate channel c2 type 'SBT_TAPE';
5> allocate channel c3 type 'SBT_TAPE';
6> send 'NB_ORA_SERV=NBUServer,NB_ORA_CLIENT=FXZMD';
7> restore database;
8> recover database;
9> release channel c1;
10> release channel c2;
11> release channel c3;
12> }
allocated channel: c1
channel c1: sid=870 devtype=SBT_TAPE
channel c1: Veritas NetBackup for Oracle - Release 7.5 (2012020801)
allocated channel: c2
channel c2: sid=866 devtype=SBT_TAPE
channel c2: Veritas NetBackup for Oracle - Release 7.5 (2012020801)
allocated channel: c3
channel c3: sid=865 devtype=SBT_TAPE
channel c3: Veritas NetBackup for Oracle - Release 7.5 (2012020801)
sent command to channel: c1
sent command to channel: c2
sent command to channel: c3
Starting restore at 27-AUG-14
channel c1: starting datafile backupset restore
channel c1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to +DGROUP1/fxzmd/datafile/system.260.851643721
restoring datafile 00004 to +DGROUP1/fxzmd/datafile/users.264.851643735
restoring datafile 00005 to +DGROUP1/fxzmd/datafile/fxzmd_data.266.851768783
restoring datafile 00007 to +DGROUP1/fxzmd/datafile/fxzmd_data.268.851768825
restoring datafile 00010 to +DGROUP1/fxzmd/datafile/tbs_ogg.276.852039351
channel c1: reading from backup piece bk_359_1_856615605
channel c2: starting datafile backupset restore
channel c2: specifying datafile(s) to restore from backup set
restoring datafile 00002 to +DGROUP1/fxzmd/datafile/undotbs1.261.851643729
restoring datafile 00003 to +DGROUP1/fxzmd/datafile/sysaux.262.851643729
restoring datafile 00006 to +DGROUP1/fxzmd/datafile/fxzmd_data.267.851768799
restoring datafile 00008 to +DGROUP1/fxzmd/datafile/fxzmd_ndx.269.851768923
restoring datafile 00009 to +DGROUP1/fxzmd/datafile/fxzmd_ndx.270.851768943
channel c2: reading from backup piece bk_358_1_856615605
channel c1: restored backup piece 1
piece handle=bk_359_1_856615605 tag=HOT_DB_BK_LEVEL0
channel c1: restore complete, elapsed time: 00:02:35
channel c2: restored backup piece 1
piece handle=bk_358_1_856615605 tag=HOT_DB_BK_LEVEL0
channel c2: restore complete, elapsed time: 00:05:20
Finished restore at 27-AUG-14
Starting recover at 27-AUG-14
starting media recovery
channel c1: starting archive log restore to default destination
channel c1: restoring archive log
archive log thread=1 sequence=1221
channel c1: restoring archive log
archive log thread=1 sequence=1222
channel c1: reading from backup piece al_363_1_856615969
channel c1: restored backup piece 1
piece handle=al_363_1_856615969 tag=TAG20140826×××25222
channel c1: restore complete, elapsed time: 00:00:26
archive log filename=+DGROUP1/fxzmd/archivelog/2014_08_27/thread_1_seq_1221.264.856710143 thread=1 sequence=1221
archive log filename=+DGROUP1/fxzmd/archivelog/2014_08_27/thread_1_seq_1222.258.856710143 thread=1 sequence=1222
unable to find archive log
archive log thread=1 sequence=1223
released channel: c1
released channel: c2
released channel: c3
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 08/27/2014 15:02:36
RMAN-06054: media recovery requesting unknown log: thread 1 seq 1223 lowscn 64299772758
RMAN> alter database open;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of alter db command at 08/27/2014 15:03:57
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
RMAN> alter database open resetlogs;
database opened
最后重启下数据库，恢复完成；
lsnrctl start
1. 创建pfile：
SQL> create pfile='/home/oracle/initfxzmd.ora' from spfile;
2. 创建spfile：
SQL> create spfile='+DGROUP1' from pfile='/home/oracle/initfxzmd.ora';
3. 修改pfile：
在$ORACLE_HOME/dbs下创建initfxzmd.ora文件，内容如下：
SPFILE='+DGROUP1/FXZMD/PARAMETERFILE/spfile.259.856714109'
4. 删除$ORACLE_HOME/dbs下的spfile，重启数据库：
SQL> show parameter spfile;
NAME TYPE VALUE
------------------------------------ ----------- ------------------------------
spfile string +DGROUP1/fxzmd/parameterfile/spfile.259.856714109
修改成功，spfile成功放入ASM磁盘组中；
5. 为了才dbca中能正常看到恢复过来的数据库，需要在
/etc/oratab 文件结尾添加如下内容：
fxzmd:/app/oracle/product/10.2/db_1:N
6. 最后做一个数据库全备！
###############################恢复20140827结束#######################
免责声明：本站发布的内容（图片、视频和文字）以原创、转载和分享为主，文章观点不代表本网站立场，如果涉及侵权请联系站长邮箱：is@yisu.com进行举报，并提供相关证据，一经查实，将立刻删除涉嫌侵权内容。
