一、环境部署：
mysql1:192.168.110.131 作为master
mysql2:192.168.110.132 作为slave
mysql3:192.168.110.130 作为slave，同时作为MHA的管理机
虚拟IP：192.168.110.100
二、mysql主从环境搭建和MHA安装
1、mysql主从搭建自行搭建（基于GTID复制，打开log_bin,复制规则默认，复制所有库表），这里不再说明。
2、安装MHA节点软件：
rpm -ivh mha4mysql-node-0.56-0.el6.noarch.rpm
3、安装MHA管理节点：
rpm -ivh mha4mysql-manager-0.56-0.el6.noarch.rpm
yum install perl-DBD-MySQL perl-Config-Tiny perl-Log-Dispatch perl-Parallel-ForkManager perl-Time-HiRes -y
4、配置MHA管理目录和配置：
mkdir -p /etc/masterha #工作目录
mkdir -p /var/log/masterha/app1/ #日志目录
cat /etc/masterha/app1.cnf #配置文件
[server default] manager_log=/var/log/masterha/app1/manager.log manager_workdir=/var/log/masterha/app1 master_ip_failover_script="/usr/bin/master_ip_failover" master_ip_online_change_script="/usr/bin/master_ip_online_change" ping_interval=1 remote_workdir=/tmp repl_password=repl repl_user=repl secondary_check_script="/usr/bin/masterha_secondary_check -s 192.168.110.132 -s 192.168.110.130 --user=root --master_host=mysql1 --master_ip=192.168.110.131 --master_port=3306" ssh_user=root user=mha password=mha [server1] hostname=mysql1 master_binlog_dir="/data/mysql/mysql3306/binlog" port=3306 [server2] hostname=mysql2 master_binlog_dir="/data/mysql/mysql3306/binlog" port=3306 candidate_master=1 check_repl_delay=0 [server3] hostname=ansible master_binlog_dir="/data/mysql/mysql3306/binlog" port=3306 no_master=1 [binlog1] hostname=mysql2 master_binlog_dir=/tmp/binlog ignore_fail=1 no_master=1
5、配置MHA管理数据库账号mha:
mysql>GRANT ALL PRIVILEGES ON *.* TO 'mha'@'192.168.110.%' IDENTIFIED BY 'mha';
6、配置主库的binlog实时备份，脚本部署在mysql2上（非必须，如无，请去掉app1.cnf里面的[binlog1]配置信息）：
cat binlog.sh
#!/bin/sh
BACKUP_BIN="/usr/bin/mysqlbinlog"
LOCAL_BACKUP_DIR="/tmp/binlog"
BACKUP_LOG="/tmp/binlog/binary.log"
REMOTE_HOST="192.168.110.131"
REMOTE_PORT="3306"
REMOTE_USER="root"
REMOTE_PASS="root"
FIRST_BINLOG="mysql-bin.000001"
#time to wait before reconnecting after failure
SLEEP_SECONDS=10
##create local_backup_dir if necessary
mkdir -p ${LOCAL_BACKUP_DIR}
cd ${LOCAL_BACKUP_DIR}
## 运行while循环，连接断开后等待指定时间，重新连接
while :
do
if [ `ls -A "${LOCAL_BACKUP_DIR}" |wc -l` -eq 0 ];then
LAST_FILE=${FIRST_BINLOG}
else
LAST_FILE=`ls -l ${LOCAL_BACKUP_DIR} | grep -v backuplog | grep mysql-bin |tail -n 1 |awk '{print $9}'`
fi
${BACKUP_BIN} --raw --read-from-remote-server --stop-never --host=${REMOTE_HOST} --port=${REMOTE_PORT} --user=${REMOTE_USER} --password=${REMOTE_PASS} ${LAST_FILE}
echo "`date +"%Y/%m/%d %H:%M:%S"` mysqlbinlog停止，返回代码：$?" | tee -a ${BACKUP_LOG}
echo "${SLEEP_SECONDS}秒后再次连接并继续备份" | tee -a ${BACKUP_LOG}
sleep ${SLEEP_SECONDS}
done7、修改/usr/bin/master_ip_failover和master_ip_online_change脚本，这里采用脚本切换VIP的方式实现VIP漂移，需要在脚本上加上对VIP漂移的处理逻辑。
/usr/bin/master_ip_failover脚本如下：
#!/usr/bin/env perl
use strict;
use warnings FATAL => 'all';
use Getopt::Long;
my (
$command, $ssh_user, $orig_master_host, $orig_master_ip,
$orig_master_port, $new_master_host, $new_master_ip, $new_master_port
);
my $gateway = '192.168.110.2';
my $vip = '192.168.110.100'; # Virtual IP
my $key = "2";
my $ssh_start_vip = "/sbin/ifconfig eth0:$key $vip;/sbin/arping -I eth0 -c 3 -s $vip $gateway >/dev/null 2>&1";
my $ssh_stop_vip = "/sbin/ifconfig eth0:$key down";
$ssh_user = "root";
GetOptions(
'command=s' => \$command,
'ssh_user=s' => \$ssh_user,
'orig_master_host=s' => \$orig_master_host,
'orig_master_ip=s' => \$orig_master_ip,
'orig_master_port=i' => \$orig_master_port,
'new_master_host=s' => \$new_master_host,
'new_master_ip=s' => \$new_master_ip,
'new_master_port=i' => \$new_master_port,
);
exit &main();
sub main {
print "\n\nIN SCRIPT TEST====$ssh_stop_vip==$ssh_start_vip===\n\n";
if ( $command eq "stop" || $command eq "stopssh" ) {
# $orig_master_host, $orig_master_ip, $orig_master_port are passed.
# If you manage master ip address at global catalog database,
# invalidate orig_master_ip here.
my $exit_code = 1;
#eval {
# print "Disabling the VIP on old master: $orig_master_host \n";
# &stop_vip();
# $exit_code = 0;
#};
eval {
print "Disabling the VIP on old master: $orig_master_host \n";
#my $ping=`ping -c 1 10.0.0.13 | grep "packet loss" | awk -F',' '{print $3}' | awk '{print $1}'`;
#if ( $ping le "90.0%" && $ping gt "0.0%" ){
#$exit_code = 0;
#}
#else {
&stop_vip();
# updating global catalog, etc
$exit_code = 0;
#}
};
if ($@) {
warn "Got Error: $@\n";
exit $exit_code;
}
exit $exit_code;
}
elsif ( $command eq "start" ) {
# all arguments are passed.
# If you manage master ip address at global catalog database,
# activate new_master_ip here.
# You can also grant write access (create user, set read_only=0, etc) here.
my $exit_code = 10;
eval {
print "Enabling the VIP - $vip on the new master - $new_master_host \n";
&start_vip();
$exit_code = 0;
};
if ($@) {
warn $@;
exit $exit_code;
}
exit $exit_code;
}
elsif ( $command eq "status" ) {
print "Checking the Status of the script.. OK \n";
`ssh $ssh_user\@$orig_master_ip \" $ssh_start_vip \"`;
exit 0;
}
else {
&usage();
exit 1;
}
}
# A simple system call that enable the VIP on the new master
sub start_vip() {
`ssh $ssh_user\@$new_master_host \" $ssh_start_vip \"`;
}
# A simple system call that disable the VIP on the old_master
sub stop_vip() {
`ssh $ssh_user\@$orig_master_host \" $ssh_stop_vip \"`;
}
sub usage {
print
"Usage: master_ip_failover --command=start|stop|stopssh|status --orig_master_host=host --orig_master_ip=ip --orig_master_port=port --new_master_host=host --new_master_ip=ip --new_master_port=port\n";
}
# the end./usr/bin/master_ip_online_change脚本如下：
#!/usr/bin/env perl # Copyright (C) 2011 DeNA Co.,Ltd. # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA ## Note: This is a sample script and is not complete. Modify the script based on your environment. use strict; use warnings FATAL => 'all'; use Getopt::Long; use MHA::DBHelper; use MHA::NodeUtil; use Time::HiRes qw( sleep gettimeofday tv_interval ); use Data::Dumper; my $_tstart; my $_running_interval = 0.1; my ( $command, $orig_master_is_new_slave, $orig_master_host, $orig_master_ip, $orig_master_port, $orig_master_user, $orig_master_password, $orig_master_ssh_user, $new_master_host, $new_master_ip, $new_master_port, $new_master_user, $new_master_password, $new_master_ssh_user, ); my $vip = '192.168.110.100'; # Virtual IP my $key = "2"; my $gateway = '192.168.110.2'; my $ssh_start_vip = "/sbin/ifconfig eth0:$key $vip;/sbin/arping -I eth0 -c 3 -s $vip $gateway >/dev/null 2>&1"; my $ssh_stop_vip = "/sbin/ifconfig eth0:$key down"; my $sshuser = "root"; GetOptions( 'command=s' => \$command, 'orig_master_is_new_slave' => \$orig_master_is_new_slave, 'orig_master_host=s' => \$orig_master_host, 'orig_master_ip=s' => \$orig_master_ip, 'orig_master_port=i' => \$orig_master_port, 'orig_master_user=s' => \$orig_master_user, 'orig_master_password=s' => \$orig_master_password, 'orig_master_ssh_user=s' => \$orig_master_ssh_user, 'new_master_host=s' => \$new_master_host, 'new_master_ip=s' => \$new_master_ip, 'new_master_port=i' => \$new_master_port, 'new_master_user=s' => \$new_master_user, 'new_master_password=s' => \$new_master_password, 'new_master_ssh_user=s' => \$new_master_ssh_user, ); exit &main(); sub current_time_us { my ( $sec, $microsec ) = gettimeofday(); my $curdate = localtime($sec); return $curdate . " " . sprintf( "%06d", $microsec ); } sub sleep_until { my $elapsed = tv_interval($_tstart); if ( $_running_interval > $elapsed ) { sleep( $_running_interval - $elapsed ); } } sub get_threads_util { my $dbh = shift; my $my_connection_id = shift; my $running_time_threshold = shift; my $type = shift; $running_time_threshold = 0 unless ($running_time_threshold); $type = 0 unless ($type); my @threads; my $sth = $dbh->prepare("SHOW PROCESSLIST"); $sth->execute(); while ( my $ref = $sth->fetchrow_hashref() ) { my $id = $ref->{Id}; my $user = $ref->{User}; my $host = $ref->{Host}; my $command = $ref->{Command}; my $state = $ref->{State}; my $query_time = $ref->{Time}; my $info = $ref->{Info}; $info =~ s/^\s*(.*?)\s*$/$1/ if defined($info); next if ( $my_connection_id == $id ); next if ( defined($query_time) && $query_time < $running_time_threshold ); next if ( defined($command) && $command eq "Binlog Dump" ); next if ( defined($user) && $user eq "system user" ); next if ( defined($command) && $command eq "Sleep" && defined($query_time) && $query_time >= 1 ); if ( $type >= 1 ) { next if ( defined($command) && $command eq "Sleep" ); next if ( defined($command) && $command eq "Connect" ); } if ( $type >= 2 ) { next if ( defined($info) && $info =~ m/^select/i ); next if ( defined($info) && $info =~ m/^show/i ); } push @threads, $ref; } return @threads; } sub main { if ( $command eq "stop" ) { ## Gracefully killing connections on the current master # 1. Set read_only= 1 on the new master # 2. DROP USER so that no app user can establish new connections # 3. Set read_only= 1 on the current master # 4. Kill current queries # * Any database access failure will result in script die. my $exit_code = 1; eval { ## Setting read_only=1 on the new master (to avoid accident) my $new_master_handler = new MHA::DBHelper(); # args: hostname, port, user, password, raise_error(die_on_error)_or_not $new_master_handler->connect( $new_master_ip, $new_master_port, $new_master_user, $new_master_password, 1 ); print current_time_us() . " Set read_only on the new master.. "; $new_master_handler->enable_read_only(); if ( $new_master_handler->is_read_only() ) { print "ok.\n"; } else { die "Failed!\n"; } $new_master_handler->disconnect(); # Connecting to the orig master, die if any database error happens my $orig_master_handler = new MHA::DBHelper(); $orig_master_handler->connect( $orig_master_ip, $orig_master_port, $orig_master_user, $orig_master_password, 1 ); ## Drop application user so that nobody can connect. Disabling per-session binlog beforehand $orig_master_handler->disable_log_bin_local(); #print current_time_us() . " Drpping app user on the orig master..\n"; #FIXME_xxx_drop_app_user($orig_master_handler); ## Waiting for N * 100 milliseconds so that current connections can exit my $time_until_read_only = 15; $_tstart = [gettimeofday]; my @threads = get_threads_util( $orig_master_handler->{dbh}, $orig_master_handler->{connection_id} ); while ( $time_until_read_only > 0 && $#threads >= 0 ) { if ( $time_until_read_only % 5 == 0 ) { printf "%s Waiting all running %d threads are disconnected.. (max %d milliseconds)\n", current_time_us(), $#threads + 1, $time_until_read_only * 100; if ( $#threads < 5 ) { print Data::Dumper->new( [$_] )->Indent(0)->Terse(1)->Dump . "\n" foreach (@threads); } } sleep_until(); $_tstart = [gettimeofday]; $time_until_read_only--; @threads = get_threads_util( $orig_master_handler->{dbh}, $orig_master_handler->{connection_id} ); } ## Setting read_only=1 on the current master so that nobody(except SUPER) can write print current_time_us() . " Set read_only=1 on the orig master.. "; $orig_master_handler->enable_read_only(); if ( $orig_master_handler->is_read_only() ) { print "ok.\n"; } else { die "Failed!\n"; } ## Waiting for M * 100 milliseconds so that current update queries can complete my $time_until_kill_threads = 5; @threads = get_threads_util( $orig_master_handler->{dbh}, $orig_master_handler->{connection_id} ); while ( $time_until_kill_threads > 0 && $#threads >= 0 ) { if ( $time_until_kill_threads % 5 == 0 ) { printf "%s Waiting all running %d queries are disconnected.. (max %d milliseconds)\n", current_time_us(), $#threads + 1, $time_until_kill_threads * 100; if ( $#threads < 5 ) { print Data::Dumper->new( [$_] )->Indent(0)->Terse(1)->Dump . "\n" foreach (@threads); } } sleep_until(); $_tstart = [gettimeofday]; $time_until_kill_threads--; @threads = get_threads_util( $orig_master_handler->{dbh}, $orig_master_handler->{connection_id} ); } ## Terminating all threads print current_time_us() . " Killing all application threads..\n"; $orig_master_handler->kill_threads(@threads) if ( $#threads >= 0 ); print current_time_us() . " done.\n"; $orig_master_handler->enable_log_bin_local(); $orig_master_handler->disconnect(); ## After finishing the script, MHA executes FLUSH TABLES WITH READ LOCK print "Disabling the VIP on old master: $orig_master_host \n"; &stop_vip(); $exit_code = 0; }; if ($@) { warn "Got Error: $@\n"; exit $exit_code; } exit $exit_code; } elsif ( $command eq "start" ) { ## Activating master ip on the new master # 1. Create app user with write privileges # 2. Moving backup script if needed # 3. Register new master's ip to the catalog database # We don't return error even though activating updatable accounts/ip failed so that we don't interrupt slaves' recovery. # If exit code is 0 or 10, MHA does not abort my $exit_code = 10; eval { my $new_master_handler = new MHA::DBHelper(); # args: hostname, port, user, password, raise_error_or_not $new_master_handler->connect( $new_master_ip, $new_master_port, $new_master_user, $new_master_password, 1 ); ## Set read_only=0 on the new master $new_master_handler->disable_log_bin_local(); print current_time_us() . " Set read_only=0 on the new master.\n"; $new_master_handler->disable_read_only(); ## Creating an app user on the new master #print current_time_us() . " Creating app user on the new master..\n"; #FIXME_xxx_create_app_user($new_master_handler); $new_master_handler->enable_log_bin_local(); $new_master_handler->disconnect(); print "Enabling the VIP - $vip on the new master - $new_master_host \n"; &start_vip(); ## Update master ip on the catalog database, etc $exit_code = 0; }; if ($@) { warn "Got Error: $@\n"; exit $exit_code; } exit $exit_code; } elsif ( $command eq "status" ) { # do nothing exit 0; } else { &usage(); exit 1; } } # A simple system call that enable the VIP on the new master sub start_vip() { `ssh $sshuser\@$new_master_host \" $ssh_start_vip \"`; } # A simple system call that disable the VIP on the old_master sub stop_vip() { `ssh $sshuser\@$orig_master_host \" $ssh_stop_vip \"`; } sub usage { print "Usage: master_ip_online_change --command=start|stop|status --orig_master_host=host --orig_master_ip=ip --orig_master_port=port --new_master_host=host --new_master_ip=ip --new_master_port=port\n"; die; }
注：FIXME_xxx_drop_app_user和FIXME_xxx_create_app_user请注释掉，运行该脚本会报错，暂时注销掉，不影响后续的进程。
8、配置SSH免密登陆：(以ansible为例)
ssh-keygen -t rsa ssh-copy-id -i ~/.ssh/id_rsa.pub root@mysql1 ssh-copy-id -i ~/.ssh/id_rsa.pub root@mysql2 ssh-copy-id -i ~/.ssh/id_rsa.pub root@ansible
基本上MHA manager，MNA node，以及二次检测的节点，都需要互相信任
注：这里配置免密的时候采用主机名，那在app1.cnf里的hostname对应也要配置成主机名。如果是IP，那就配置成IP。
9、配置sysbench压测工具，模拟生产对数据库进行压测。
安装sysbench请自行百度，这里只提供压测脚本。
mysql>grant all privileges on sbtest1.* on root@'192.168.110.%' identified by 'root';
vim sysbench.sh
#!/bin/sh
function prepare(){
sysbench --test=oltp --mysql-host=192.168.110.100 --mysql-port=3306 --mysql-user=root --mysql-password=root --mysql-db=sbtest1 --oltp-num-tables=10 --oltp-table-size=500000 --report-interval=10 --max-requests=0 --oltp-test-mode=nontrx --oltp-nontrx-mode=select --oltp-read-only=off --max-time=30 --num-threads=10 prepare
}
function run(){
sysbench --test=oltp --mysql-host=192.168.110.100 --mysql-port=3306 --mysql-user=root --mysql-password=root --mysql-db=sbtest1 --oltp-num-tables=10 --oltp-table-size=500000 --report-interval=10 --max-requests=0 --oltp-test-mode=nontrx --oltp-nontrx-mode=select --oltp-read-only=off --max-time=30 --num-threads=10 run
}
function cleanup(){
sysbench --test=oltp --mysql-host=192.168.110.100 --mysql-port=3306 --mysql-user=root --mysql-password=root --mysql-db=sbtest1 --oltp-num-tables=10 --oltp-table-size=500000 --report-interval=10 --max-requests=0 --oltp-test-mode=nontrx --oltp-nontrx-mode=select --oltp-read-only=off --max-time=30 --num-threads=10 cleanup
}
case "$1" in
prepare)
prepare
;;
run)
run
;;
cleanup)
cleanup
;;
*)
echo "Usage: $0 prepare|run|cleanup"
esac脚本对VIP所在的mysql即主库进行压测。
10、检测SSH状态：
[root@ansible app1]# masterha_check_ssh --conf=/etc/masterha/app1.cnf Wed Mar 15 13:10:05 2017 - [warning] Global configuration file /etc/masterha_default.cnf not found. Skipping. Wed Mar 15 13:10:05 2017 - [info] Reading application default configuration from /etc/masterha/app1.cnf.. Wed Mar 15 13:10:05 2017 - [info] Reading server configuration from /etc/masterha/app1.cnf.. Wed Mar 15 13:10:05 2017 - [info] Starting SSH connection tests.. Wed Mar 15 13:10:06 2017 - [debug] Wed Mar 15 13:10:05 2017 - [debug] Connecting via SSH from root@mysql1(192.168.110.131:22) to root@mysql2(192.168.110.132:22).. Wed Mar 15 13:10:05 2017 - [debug] ok. Wed Mar 15 13:10:05 2017 - [debug] Connecting via SSH from root@mysql1(192.168.110.131:22) to root@ansible(192.168.110.130:22).. Wed Mar 15 13:10:06 2017 - [debug] ok. Wed Mar 15 13:10:06 2017 - [debug] Wed Mar 15 13:10:05 2017 - [debug] Connecting via SSH from root@mysql2(192.168.110.132:22) to root@mysql1(192.168.110.131:22).. Wed Mar 15 13:10:06 2017 - [debug] ok. Wed Mar 15 13:10:06 2017 - [debug] Connecting via SSH from root@mysql2(192.168.110.132:22) to root@ansible(192.168.110.130:22).. Wed Mar 15 13:10:06 2017 - [debug] ok. Wed Mar 15 13:10:07 2017 - [debug] Wed Mar 15 13:10:06 2017 - [debug] Connecting via SSH from root@ansible(192.168.110.130:22) to root@mysql1(192.168.110.131:22).. Wed Mar 15 13:10:06 2017 - [debug] ok. Wed Mar 15 13:10:06 2017 - [debug] Connecting via SSH from root@ansible(192.168.110.130:22) to root@mysql2(192.168.110.132:22).. Wed Mar 15 13:10:07 2017 - [debug] ok. Wed Mar 15 13:10:07 2017 - [info] All SSH connection tests passed successfully.
11、检测复制状态：
[root@ansible app1]# masterha_check_repl --conf=/etc/masterha/app1.cnf
Tue Mar 14 17:29:38 2017 - [warning] Global configuration file /etc/masterha_default.cnf not found. Skipping. Tue Mar 14 17:29:38 2017 - [info] Reading application default configuration from /etc/masterha/app1.cnf.. Tue Mar 14 17:29:38 2017 - [info] Reading server configuration from /etc/masterha/app1.cnf.. Tue Mar 14 17:29:38 2017 - [info] MHA::MasterMonitor version 0.56. Tue Mar 14 17:29:38 2017 - [info] GTID failover mode = 0 Tue Mar 14 17:29:38 2017 - [info] Dead Servers: Tue Mar 14 17:29:38 2017 - [info] Alive Servers: Tue Mar 14 17:29:38 2017 - [info] mysql1(192.168.110.131:3306) Tue Mar 14 17:29:38 2017 - [info] mysql2(192.168.110.132:3306) Tue Mar 14 17:29:38 2017 - [info] ansible(192.168.110.130:3306) Tue Mar 14 17:29:38 2017 - [info] Alive Slaves: Tue Mar 14 17:29:38 2017 - [info] mysql2(192.168.110.132:3306) Version=5.6.34-log (oldest major version between slaves) log-bin:enabled Tue Mar 14 17:29:38 2017 - [info] GTID ON Tue Mar 14 17:29:38 2017 - [info] Replicating from 192.168.110.131(192.168.110.131:3306) Tue Mar 14 17:29:38 2017 - [info] Primary candidate for the new Master (candidate_master is set) Tue Mar 14 17:29:38 2017 - [info] ansible(192.168.110.130:3306) Version=5.6.34-log (oldest major version between slaves) log-bin:enabled Tue Mar 14 17:29:38 2017 - [info] GTID ON Tue Mar 14 17:29:38 2017 - [info] Replicating from 192.168.110.131(192.168.110.131:3306) Tue Mar 14 17:29:38 2017 - [info] Current Alive Master: mysql1(192.168.110.131:3306) Tue Mar 14 17:29:38 2017 - [info] Checking slave configurations.. Tue Mar 14 17:29:38 2017 - [info] read_only=1 is not set on slave mysql2(192.168.110.132:3306). Tue Mar 14 17:29:38 2017 - [info] read_only=1 is not set on slave ansible(192.168.110.130:3306). Tue Mar 14 17:29:38 2017 - [info] Checking replication filtering settings.. Tue Mar 14 17:29:38 2017 - [info] binlog_do_db= , binlog_ignore_db= Tue Mar 14 17:29:38 2017 - [info] Replication filtering check ok. Tue Mar 14 17:29:38 2017 - [info] GTID (with auto-pos) is not supported Tue Mar 14 17:29:38 2017 - [info] Starting SSH connection tests.. Tue Mar 14 17:29:40 2017 - [info] All SSH connection tests passed successfully. Tue Mar 14 17:29:40 2017 - [info] Checking MHA Node version.. Tue Mar 14 17:29:40 2017 - [info] Version check ok. Tue Mar 14 17:29:40 2017 - [info] Checking SSH publickey authentication settings on the current master.. Tue Mar 14 17:29:40 2017 - [info] HealthCheck: SSH to mysql1 is reachable. Tue Mar 14 17:29:40 2017 - [info] Checking recovery script configurations on mysql1(192.168.110.131:3306).. Tue Mar 14 17:29:40 2017 - [info] Executing command: save_binary_logs --command=test --start_pos=4 --binlog_dir=/data/mysql/mysql3306/binlog --output_file=/tmp/save_binary_logs_test --manager_version=0.56 --start_file=mysql-bin.000001 Tue Mar 14 17:29:40 2017 - [info] Connecting to root@192.168.110.131(mysql1:22).. Creating /tmp if not exists.. ok. Checking output directory is accessible or not.. ok. Binlog found at /data/mysql/mysql3306/binlog, up to mysql-bin.000001 Tue Mar 14 17:29:41 2017 - [info] Binlog setting check done. Tue Mar 14 17:29:41 2017 - [info] Checking SSH publickey authentication and checking recovery script configurations on all alive slave servers.. Tue Mar 14 17:29:41 2017 - [info] Executing command : apply_diff_relay_logs --command=test --slave_user='mha' --slave_host=mysql2 --slave_ip=192.168.110.132 --slave_port=3306 --workdir=/tmp --target_version=5.6.34-log --manager_version=0.56 --relay_dir=/data/mysql/mysql3306/relaylog --current_relay_log=slave-relay-bin.000002 --slave_pass=xxx Tue Mar 14 17:29:41 2017 - [info] Connecting to root@192.168.110.132(mysql2:22).. Checking slave recovery environment settings.. Relay log found at /data/mysql/mysql3306/relaylog, up to slave-relay-bin.000002 Temporary relay log file is /data/mysql/mysql3306/relaylog/slave-relay-bin.000002 Testing mysql connection and privileges..Warning: Using a password on the command line interface can be insecure. done. Testing mysqlbinlog output.. done. Cleaning up test file(s).. done. Tue Mar 14 17:29:42 2017 - [info] Executing command : apply_diff_relay_logs --command=test --slave_user='mha' --slave_host=ansible --slave_ip=192.168.110.130 --slave_port=3306 --workdir=/tmp --target_version=5.6.34-log --manager_version=0.56 --relay_dir=/data/mysql/mysql3306/relaylog --current_relay_log=slave-relay-bin.000002 --slave_pass=xxx Tue Mar 14 17:29:42 2017 - [info] Connecting to root@192.168.110.130(ansible:22).. Checking slave recovery environment settings.. Relay log found at /data/mysql/mysql3306/relaylog, up to slave-relay-bin.000002 Temporary relay log file is /data/mysql/mysql3306/relaylog/slave-relay-bin.000002 Testing mysql connection and privileges..Warning: Using a password on the command line interface can be insecure. done. Testing mysqlbinlog output.. done. Cleaning up test file(s).. done. Tue Mar 14 17:29:42 2017 - [info] Slaves settings check done. Tue Mar 14 17:29:42 2017 - [info] mysql1(192.168.110.131:3306) (current master) +--mysql2(192.168.110.132:3306) +--ansible(192.168.110.130:3306) Tue Mar 14 17:29:42 2017 - [info] Checking replication health on mysql2.. Tue Mar 14 17:29:42 2017 - [info] ok. Tue Mar 14 17:29:42 2017 - [info] Checking replication health on ansible.. Tue Mar 14 17:29:42 2017 - [info] ok. Tue Mar 14 17:29:42 2017 - [info] Checking master_ip_failover_script status: Tue Mar 14 17:29:42 2017 - [info] /usr/bin/master_ip_failover --command=status --ssh_user=root --orig_master_host=mysql1 --orig_master_ip=192.168.110.131 --orig_master_port=3306 IN SCRIPT TEST====/sbin/ifconfig eth0:2 down==/sbin/ifconfig eth0:2 192.168.110.100;/sbin/arping -I eth0 -c 3 -s 192.168.110.100 192.168.110.2 >/dev/null 2>&1=== Checking the Status of the script.. OK Tue Mar 14 17:29:45 2017 - [info] OK. Tue Mar 14 17:29:45 2017 - [warning] shutdown_script is not defined. Tue Mar 14 17:29:45 2017 - [info] Got exit code 0 (Not master dead). MySQL Replication Health is OK.
13、启动、关闭和检测manager状态：
vim masterha_manager.sh
#!/bin/sh
function start(){
nohup /usr/bin/masterha_manager --conf=/etc/masterha/app1.cnf --ignore_last_failover < /dev/null > /var/log/masterha/app1/manager.log 2>&1 &
}
function stop(){
/usr/bin/masterha_stop --conf=/etc/masterha/app1.cnf
}
function status(){
/usr/bin/masterha_check_status --conf=/etc/masterha/app1.cnf
}
case "$1" in
start)
start
;;
stop)
stop
;;
status)
status
;;
*)
echo "Usage: $0 start|stop"
esac14、初始化VIP：
首次启用MHA，需要提前手工配置VIP在mysql主库上。
shell>/sbin/ifconfig eth0:2 192.168.110.100
三、场景测试：
1、自动failover:
启动manager进程：sh masterha_manager.sh start
启动压测脚本：sh sysbench.sh prepare
中断mysql2的slave线程,以造成mysql2有大量延迟：mysql>stop slave;
压测一段时间
启动mysql2的slave线程，检查slave状态。并可以强行杀掉主库进程（pkill -9 mysql），即使sysbench.sh还未跑完的时候
观察此时MHA manager进程状态和日志信息。
检验VIP是否切换，检查主库是否切换，从库是否从新主库那里复制。
把旧主库拉起来，检查3台mysql数据库的GTID号是否一致，是否有丢数据的情况。
测试检验出来的情况：
1、即使在配置文件中配置mysql2为candidate_master=1和check_repl_delay=0，但是mysql2延迟量太大的话，MHA还是会选择拥有最新数据的slave作为master。
2、3台数据库的GTID号一致，没有丢数据。MHA基于GTID的架构也可以保证数据的高一致性。
3、MHA0.56基于GTID模式对MySQL一主一从的架构的支持好像有问题，如果从库没有延迟的话，可以正常failover，如果从库有延迟的话，MHA的manager进程会一直卡在Waiting all logs to be applied..这个进度下，也没有报错。（一开始测试是一主一从架构，后来改为一主两从）
日志如下：
[root@ansible app1]# cat manager.log
Tue Mar 14 16:25:27 2017 - [warning] Global configuration file /etc/masterha_default.cnf not found. Skipping. Tue Mar 14 16:25:27 2017 - [info] Reading application default configuration from /etc/masterha/app1.cnf.. Tue Mar 14 16:25:27 2017 - [info] Reading server configuration from /etc/masterha/app1.cnf.. Tue Mar 14 16:26:28 2017 - [warning] Global configuration file /etc/masterha_default.cnf not found. Skipping. Tue Mar 14 16:26:28 2017 - [info] Reading application default configuration from /etc/masterha/app1.cnf.. Tue Mar 14 16:26:28 2017 - [info] Reading server configuration from /etc/masterha/app1.cnf.. ive Servers: Tue Mar 14 16:25:28 2017 - [info] mysql1(192.168.110.131:3306) Tue Mar 14 16:25:28 2017 - [info] mysql2(192.168.110.132:3306) Tue Mar 14 16:25:28 2017 - [info] ansible(192.168.110.130:3306) Tue Mar 14 16:25:28 2017 - [info] Alive Slaves: Tue Mar 14 16:25:28 2017 - [info] mysql2(192.168.110.132:3306) Version=5.6.34-log (oldest major version between slaves) log-bin:enabled Tue Mar 14 16:25:28 2017 - [info] GTID ON Tue Mar 14 16:25:28 2017 - [info] Replicating from 192.168.110.131(192.168.110.131:3306) Tue Mar 14 16:25:28 2017 - [info] Primary candidate for the new Master (candidate_master is set) Tue Mar 14 16:25:28 2017 - [info] ansible(192.168.110.130:3306) Version=5.6.34-log (oldest major version between slaves) log-bin:enabled Tue Mar 14 16:25:28 2017 - [info] GTID ON Tue Mar 14 16:25:28 2017 - [info] Replicating from 192.168.110.131(192.168.110.131:3306) Tue Mar 14 16:25:28 2017 - [info] Current Alive Master: mysql1(192.168.110.131:3306) Tue Mar 14 16:25:28 2017 - [info] Checking slave configurations.. Tue Mar 14 16:25:28 2017 - [info] read_only=1 is not set on slave mysql2(192.168.110.132:3306). Tue Mar 14 16:25:28 2017 - [info] read_only=1 is not set on slave ansible(192.168.110.130:3306). Tue Mar 14 16:25:28 2017 - [info] Checking replication filtering settings.. Tue Mar 14 16:25:28 2017 - [info] binlog_do_db= , binlog_ignore_db= Tue Mar 14 16:25:28 2017 - [info] Replication filtering check ok. Tue Mar 14 16:25:28 2017 - [info] GTID (with auto-pos) is supported. Skipping all SSH and Node package checking. Tue Mar 14 16:25:29 2017 - [info] HealthCheck: SSH to mysql2 is reachable. Tue Mar 14 16:25:29 2017 - [info] Binlog server mysql2 is reachable. Tue Mar 14 16:25:29 2017 - [info] Checking recovery script configurations on mysql2(192.168.110.132:3306).. Tue Mar 14 16:25:29 2017 - [info] Executing command: save_binary_logs --command=test --start_pos=4 --binlog_dir=/tmp/binlog --output_file=/tmp/save_binary_logs_test --manager_version=0.56 --start_file=mysql-bin.000001 Tue Mar 14 16:25:29 2017 - [info] Connecting to root@192.168.110.132(mysql2:22).. Creating /tmp if not exists.. ok. Checking output directory is accessible or not.. ok. Binlog found at /tmp/binlog, up to mysql-bin.000015 Tue Mar 14 16:25:29 2017 - [info] Binlog setting check done. Tue Mar 14 16:25:29 2017 - [info] Checking SSH publickey authentication settings on the current master.. Tue Mar 14 16:25:34 2017 - [warning] HealthCheck: Got timeout on checking SSH connection to mysql1! at /usr/share/perl5/vendor_perl/MHA/HealthCheck.pm line 342. Tue Mar 14 16:25:34 2017 - [info] mysql1(192.168.110.131:3306) (current master) +--mysql2(192.168.110.132:3306) +--ansible(192.168.110.130:3306) Tue Mar 14 16:25:34 2017 - [info] Checking master_ip_failover_script status: Tue Mar 14 16:25:34 2017 - [info] /usr/bin/master_ip_failover --command=status --ssh_user=root --orig_master_host=mysql1 --orig_master_ip=192.168.110.131 --orig_master_port=3306 IN SCRIPT TEST====/sbin/ifconfig eth0:2 down==/sbin/ifconfig eth0:2 192.168.110.100;/sbin/arping -I eth0 -c 3 -s 192.168.110.100 192.168.110.2 >/dev/null 2>&1=== Checking the Status of the script.. OK Tue Mar 14 16:25:49 2017 - [info] OK. Tue Mar 14 16:25:49 2017 - [warning] shutdown_script is not defined. Tue Mar 14 16:25:49 2017 - [info] Set master ping interval 1 seconds. Tue Mar 14 16:25:49 2017 - [info] Set secondary check script: /usr/bin/masterha_secondary_check -s 192.168.110.132 -s 192.168.110.130 --user=root --master_host=mysql1 --master_ip=192.168.110.131 --master_port=3306 Tue Mar 14 16:25:49 2017 - [info] Starting ping health check on mysql1(192.168.110.131:3306).. Tue Mar 14 16:25:49 2017 - [info] Ping(SELECT) succeeded, waiting until MySQL doesn't respond.. Tue Mar 14 16:26:25 2017 - [warning] Got error on MySQL select ping: 2006 (MySQL server has gone away) Tue Mar 14 16:26:25 2017 - [info] Executing SSH check script: exit 0 Tue Mar 14 16:26:25 2017 - [info] Executing secondary network check script: /usr/bin/masterha_secondary_check -s 192.168.110.132 -s 192.168.110.130 --user=root --master_host=mysql1 --master_ip=192.168.110.131 --master_port=3306 --user=root --master_host=mysql1 --master_ip=192.168.110.131 --master_port=3306 --master_user=mha --master_password=mha --ping_type=SELECT Monitoring server 192.168.110.132 is reachable, Master is not reachable from 192.168.110.132. OK. Tue Mar 14 16:26:26 2017 - [info] HealthCheck: SSH to mysql1 is reachable. Monitoring server 192.168.110.130 is reachable, Master is not reachable from 192.168.110.130. OK. Tue Mar 14 16:26:26 2017 - [info] Master is not reachable from all other monitoring servers. Failover should start. Tue Mar 14 16:26:26 2017 - [warning] Got error on MySQL connect: 2013 (Lost connection to MySQL server at 'reading initial communication packet', system error: 111) Tue Mar 14 16:26:26 2017 - [warning] Connection failed 2 time(s).. Tue Mar 14 16:26:27 2017 - [warning] Got error on MySQL connect: 2013 (Lost connection to MySQL server at 'reading initial communication packet', system error: 111) Tue Mar 14 16:26:27 2017 - [warning] Connection failed 3 time(s).. Tue Mar 14 16:26:28 2017 - [warning] Got error on MySQL connect: 2013 (Lost connection to MySQL server at 'reading initial communication packet', system error: 111) Tue Mar 14 16:26:28 2017 - [warning] Connection failed 4 time(s).. Tue Mar 14 16:26:28 2017 - [warning] Master is not reachable from health checker! Tue Mar 14 16:26:28 2017 - [warning] Master mysql1(192.168.110.131:3306) is not reachable! Tue Mar 14 16:26:28 2017 - [warning] SSH is reachable. Tue Mar 14 16:26:28 2017 - [info] Connecting to a master server failed. Reading configuration file /etc/masterha_default.cnf and /etc/masterha/app1.cnf again, and trying to connect to all servers to check server status.. Tue Mar 14 16:26:28 2017 - [warning] Global configuration file /etc/masterha_default.cnf not found. Skipping. Tue Mar 14 16:26:28 2017 - [info] Reading application default configuration from /etc/masterha/app1.cnf.. Tue Mar 14 16:26:28 2017 - [info] Reading server configuration from /etc/masterha/app1.cnf.. Tue Mar 14 16:26:28 2017 - [info] GTID failover mode = 1 Tue Mar 14 16:26:28 2017 - [info] Dead Servers: Tue Mar 14 16:26:28 2017 - [info] mysql1(192.168.110.131:3306) Tue Mar 14 16:26:28 2017 - [info] Alive Servers: Tue Mar 14 16:26:28 2017 - [info] mysql2(192.168.110.132:3306) Tue Mar 14 16:26:28 2017 - [info] ansible(192.168.110.130:3306) Tue Mar 14 16:26:28 2017 - [info] Alive Slaves: Tue Mar 14 16:26:28 2017 - [info] mysql2(192.168.110.132:3306) Version=5.6.34-log (oldest major version between slaves) log-bin:enabled Tue Mar 14 16:26:28 2017 - [info] GTID ON Tue Mar 14 16:26:28 2017 - [info] Replicating from 192.168.110.131(192.168.110.131:3306) Tue Mar 14 16:26:28 2017 - [info] Primary candidate for the new Master (candidate_master is set) Tue Mar 14 16:26:28 2017 - [info] ansible(192.168.110.130:3306) Version=5.6.34-log (oldest major version between slaves) log-bin:enabled Tue Mar 14 16:26:28 2017 - [info] GTID ON Tue Mar 14 16:26:28 2017 - [info] Replicating from 192.168.110.131(192.168.110.131:3306) Tue Mar 14 16:26:28 2017 - [info] Checking slave configurations.. Tue Mar 14 16:26:28 2017 - [info] read_only=1 is not set on slave mysql2(192.168.110.132:3306). Tue Mar 14 16:26:28 2017 - [info] read_only=1 is not set on slave ansible(192.168.110.130:3306). Tue Mar 14 16:26:28 2017 - [info] Checking replication filtering settings.. Tue Mar 14 16:26:28 2017 - [info] Replication filtering check ok. Tue Mar 14 16:26:28 2017 - [info] Master is down! Tue Mar 14 16:26:28 2017 - [info] Terminating monitoring script. Tue Mar 14 16:26:28 2017 - [info] Got exit code 20 (Master dead). Tue Mar 14 16:26:28 2017 - [info] MHA::MasterFailover version 0.56. Tue Mar 14 16:26:28 2017 - [info] Starting master failover. Tue Mar 14 16:26:28 2017 - [info] Tue Mar 14 16:26:28 2017 - [info] * Phase 1: Configuration Check Phase.. Tue Mar 14 16:26:28 2017 - [info] Tue Mar 14 16:26:28 2017 - [info] HealthCheck: SSH to mysql2 is reachable. Tue Mar 14 16:26:28 2017 - [info] Binlog server mysql2 is reachable. Tue Mar 14 16:26:29 2017 - [info] GTID failover mode = 1 Tue Mar 14 16:26:29 2017 - [info] Dead Servers: Tue Mar 14 16:26:29 2017 - [info] mysql1(192.168.110.131:3306) Tue Mar 14 16:26:29 2017 - [info] Checking master reachability via MySQL(double check)... Tue Mar 14 16:26:29 2017 - [info] ok. Tue Mar 14 16:26:29 2017 - [info] Alive Servers: Tue Mar 14 16:26:29 2017 - [info] mysql2(192.168.110.132:3306) Tue Mar 14 16:26:29 2017 - [info] ansible(192.168.110.130:3306) Tue Mar 14 16:26:29 2017 - [info] Alive Slaves: Tue Mar 14 16:26:29 2017 - [info] mysql2(192.168.110.132:3306) Version=5.6.34-log (oldest major version between slaves) log-bin:enabled Tue Mar 14 16:26:29 2017 - [info] GTID ON Tue Mar 14 16:26:29 2017 - [info] Replicating from 192.168.110.131(192.168.110.131:3306) Tue Mar 14 16:26:29 2017 - [info] Primary candidate for the new Master (candidate_master is set) Tue Mar 14 16:26:29 2017 - [info] ansible(192.168.110.130:3306) Version=5.6.34-log (oldest major version between slaves) log-bin:enabled Tue Mar 14 16:26:29 2017 - [info] GTID ON Tue Mar 14 16:26:29 2017 - [info] Replicating from 192.168.110.131(192.168.110.131:3306) Tue Mar 14 16:26:29 2017 - [info] Starting GTID based failover. Tue Mar 14 16:26:29 2017 - [info] Tue Mar 14 16:26:29 2017 - [info] ** Phase 1: Configuration Check Phase completed. Tue Mar 14 16:26:29 2017 - [info] Tue Mar 14 16:26:29 2017 - [info] * Phase 2: Dead Master Shutdown Phase.. Tue Mar 14 16:26:29 2017 - [info] Tue Mar 14 16:26:29 2017 - [info] Forcing shutdown so that applications never connect to the current master.. Tue Mar 14 16:26:29 2017 - [info] Executing master IP deactivation script: Tue Mar 14 16:26:29 2017 - [info] /usr/bin/master_ip_failover --orig_master_host=mysql1 --orig_master_ip=192.168.110.131 --orig_master_port=3306 --command=stopssh --ssh_user=root IN SCRIPT TEST====/sbin/ifconfig eth0:2 down==/sbin/ifconfig eth0:2 192.168.110.100;/sbin/arping -I eth0 -c 3 -s 192.168.110.100 192.168.110.2 >/dev/null 2>&1=== Disabling the VIP on old master: mysql1 Tue Mar 14 16:26:29 2017 - [info] done. Tue Mar 14 16:26:29 2017 - [warning] shutdown_script is not set. Skipping explicit shutting down of the dead master. Tue Mar 14 16:26:29 2017 - [info] * Phase 2: Dead Master Shutdown Phase completed. Tue Mar 14 16:26:29 2017 - [info] Tue Mar 14 16:26:29 2017 - [info] * Phase 3: Master Recovery Phase.. Tue Mar 14 16:26:29 2017 - [info] Tue Mar 14 16:26:29 2017 - [info] * Phase 3.1: Getting Latest Slaves Phase.. Tue Mar 14 16:26:29 2017 - [info] Tue Mar 14 16:26:29 2017 - [info] The latest binary log file/position on all slaves is mysql-bin.000001:133309374 Tue Mar 14 16:26:29 2017 - [info] Retrieved Gtid Set: c897448e-07c8-11e7-8af3-000c29918f29:1-244 Tue Mar 14 16:26:29 2017 - [info] Latest slaves (Slaves that received relay log files to the latest): Tue Mar 14 16:26:29 2017 - [info] ansible(192.168.110.130:3306) Version=5.6.34-log (oldest major version between slaves) log-bin:enabled Tue Mar 14 16:26:29 2017 - [info] GTID ON Tue Mar 14 16:26:29 2017 - [info] Replicating from 192.168.110.131(192.168.110.131:3306) Tue Mar 14 16:26:29 2017 - [info] The oldest binary log file/position on all slaves is mysql-bin.000001:31201438 Tue Mar 14 16:26:29 2017 - [info] Retrieved Gtid Set: c897448e-07c8-11e7-8af3-000c29918f29:1-81 Tue Mar 14 16:26:29 2017 - [info] Oldest slaves: Tue Mar 14 16:26:29 2017 - [info] mysql2(192.168.110.132:3306) Version=5.6.34-log (oldest major version between slaves) log-bin:enabled Tue Mar 14 16:26:29 2017 - [info] GTID ON Tue Mar 14 16:26:29 2017 - [info] Replicating from 192.168.110.131(192.168.110.131:3306) Tue Mar 14 16:26:29 2017 - [info] Primary candidate for the new Master (candidate_master is set) Tue Mar 14 16:26:29 2017 - [info] Tue Mar 14 16:26:29 2017 - [info] * Phase 3.3: Determining New Master Phase.. Tue Mar 14 16:26:29 2017 - [info] Tue Mar 14 16:26:29 2017 - [warning] Slave mysql2(192.168.110.132:3306) SQL Thread delays too much. Latest log file:mysql-bin.000001:133309374, Current log file:mysql-bin.000001:31152313. This server is not selected as a new master because recovery will take long time. Tue Mar 14 16:26:29 2017 - [info] Searching new master from slaves.. Tue Mar 14 16:26:29 2017 - [info] Candidate masters from the configuration file: Tue Mar 14 16:26:29 2017 - [info] mysql2(192.168.110.132:3306) Version=5.6.34-log (oldest major version between slaves) log-bin:enabled Tue Mar 14 16:26:29 2017 - [info] GTID ON Tue Mar 14 16:26:29 2017 - [info] Replicating from 192.168.110.131(192.168.110.131:3306) Tue Mar 14 16:26:29 2017 - [info] Primary candidate for the new Master (candidate_master is set) Tue Mar 14 16:26:29 2017 - [info] Non-candidate masters: Tue Mar 14 16:26:29 2017 - [info] mysql2(192.168.110.132:3306) Version=5.6.34-log (oldest major version between slaves) log-bin:enabled Tue Mar 14 16:26:29 2017 - [info] GTID ON Tue Mar 14 16:26:29 2017 - [info] Replicating from 192.168.110.131(192.168.110.131:3306) Tue Mar 14 16:26:29 2017 - [info] Primary candidate for the new Master (candidate_master is set) Tue Mar 14 16:26:29 2017 - [info] Searching from candidate_master slaves which have received the latest relay log events.. Tue Mar 14 16:26:29 2017 - [info] Not found. Tue Mar 14 16:26:29 2017 - [info] Searching from all candidate_master slaves.. Tue Mar 14 16:26:29 2017 - [info] Not found. Tue Mar 14 16:26:29 2017 - [info] Searching from all slaves which have received the latest relay log events.. Tue Mar 14 16:26:29 2017 - [info] New master is ansible(192.168.110.130:3306) Tue Mar 14 16:26:29 2017 - [info] Starting master failover.. Tue Mar 14 16:26:29 2017 - [info] From: mysql1(192.168.110.131:3306) (current master) +--mysql2(192.168.110.132:3306) +--ansible(192.168.110.130:3306) To: ansible(192.168.110.130:3306) (new master) +--mysql2(192.168.110.132:3306) Tue Mar 14 16:26:29 2017 - [info] Tue Mar 14 16:26:29 2017 - [info] * Phase 3.3: New Master Recovery Phase.. Tue Mar 14 16:26:29 2017 - [info] Tue Mar 14 16:26:29 2017 - [info] Waiting all logs to be applied.. Tue Mar 14 16:26:29 2017 - [info] done. Tue Mar 14 16:26:29 2017 - [info] -- Saving binlog from host mysql2 started, pid: 39734 Tue Mar 14 16:26:29 2017 - [info] Tue Mar 14 16:26:29 2017 - [info] Log messages from mysql2 ... Tue Mar 14 16:26:29 2017 - [info] Tue Mar 14 16:26:29 2017 - [info] Fetching binary logs from binlog server mysql2.. Tue Mar 14 16:26:29 2017 - [info] Executing binlog save command: save_binary_logs --command=save --start_file=mysql-bin.000001 --start_pos=133309374 --output_file=/tmp/saved_binlog_binlog1_20170314162628.binlog --handle_raw_binlog=0 --skip_filter=1 --disable_log_bin=0 --manager_version=0.56 --oldest_version=5.6.34-log --binlog_dir=/tmp/binlog Creating /tmp if not exists.. ok. Concat binary/relay logs from mysql-bin.000001 pos 133309374 to mysql-bin.000015 EOF into /tmp/saved_binlog_binlog1_20170314162628.binlog .. Target file /tmp/binlog/mysql-bin.000001 size=92195648, this is smaller than exec pos 133309374. Skipping. Event not exists. Tue Mar 14 16:26:29 2017 - [info] Additional events were not found from the binlog server. No need to save. Tue Mar 14 16:26:29 2017 - [info] End of log messages from mysql2. Tue Mar 14 16:26:29 2017 - [info] No binlog events found from mysql2. Skipping Tue Mar 14 16:26:29 2017 - [info] Getting new master's binlog name and position.. Tue Mar 14 16:26:29 2017 - [info] mysql-bin.000001:133306806 Tue Mar 14 16:26:29 2017 - [info] All other slaves should start replication from here. Statement should be: CHANGE MASTER TO MASTER_HOST='ansible or 192.168.110.130', MASTER_PORT=3306, MASTER_AUTO_POSITION=1, MASTER_USER='repl', MASTER_PASSWORD='xxx'; Tue Mar 14 16:26:29 2017 - [info] Master Recovery succeeded. File:Pos:Exec_Gtid_Set: mysql-bin.000001, 133306806, c897448e-07c8-11e7-8af3-000c29918f29:1-244 Tue Mar 14 16:26:29 2017 - [info] Executing master IP activate script: Tue Mar 14 16:26:29 2017 - [info] /usr/bin/master_ip_failover --command=start --ssh_user=root --orig_master_host=mysql1 --orig_master_ip=192.168.110.131 --orig_master_port=3306 --new_master_host=ansible --new_master_ip=192.168.110.130 --new_master_port=3306 --new_master_user='mha' --new_master_password='mha' Unknown option: new_master_user Unknown option: new_master_password IN SCRIPT TEST====/sbin/ifconfig eth0:2 down==/sbin/ifconfig eth0:2 192.168.110.100;/sbin/arping -I eth0 -c 3 -s 192.168.110.100 192.168.110.2 >/dev/null 2>&1=== Enabling the VIP - 192.168.110.100 on the new master - ansible Tue Mar 14 16:26:32 2017 - [info] OK. Tue Mar 14 16:26:33 2017 - [info] ** Finished master recovery successfully. Tue Mar 14 16:26:33 2017 - [info] * Phase 3: Master Recovery Phase completed. Tue Mar 14 16:26:33 2017 - [info] Tue Mar 14 16:26:33 2017 - [info] * Phase 4: Slaves Recovery Phase.. Tue Mar 14 16:26:33 2017 - [info] Tue Mar 14 16:26:33 2017 - [info] Tue Mar 14 16:26:33 2017 - [info] * Phase 4.1: Starting Slaves in parallel.. Tue Mar 14 16:26:33 2017 - [info] Tue Mar 14 16:26:33 2017 - [info] -- Slave recovery on host mysql2(192.168.110.132:3306) started, pid: 39751. Check tmp log /var/log/masterha/app1/mysql2_3306_20170314162628.log if it takes time.. Tue Mar 14 16:27:14 2017 - [info] Tue Mar 14 16:27:14 2017 - [info] Log messages from mysql2 ... Tue Mar 14 16:27:14 2017 - [info] Tue Mar 14 16:26:33 2017 - [info] Resetting slave mysql2(192.168.110.132:3306) and starting replication from the new master ansible(192.168.110.130:3306).. Tue Mar 14 16:26:33 2017 - [info] Executed CHANGE MASTER. Tue Mar 14 16:26:33 2017 - [info] Slave started. Tue Mar 14 16:27:14 2017 - [info] gtid_wait(c897448e-07c8-11e7-8af3-000c29918f29:1-244) completed on mysql2(192.168.110.132:3306). Executed 168 events. Tue Mar 14 16:27:14 2017 - [info] End of log messages from mysql2. Tue Mar 14 16:27:14 2017 - [info] -- Slave on host mysql2(192.168.110.132:3306) started. Tue Mar 14 16:27:14 2017 - [info] All new slave servers recovered successfully. Tue Mar 14 16:27:14 2017 - [info] Tue Mar 14 16:27:14 2017 - [info] * Phase 5: New master cleanup phase.. Tue Mar 14 16:27:14 2017 - [info] Tue Mar 14 16:27:14 2017 - [info] Resetting slave info on the new master.. Tue Mar 14 16:27:15 2017 - [info] ansible: Resetting slave info succeeded. Tue Mar 14 16:27:15 2017 - [info] Master failover to ansible(192.168.110.130:3306) completed successfully. Tue Mar 14 16:27:15 2017 - [info] ----- Failover Report ----- app1: MySQL Master failover mysql1(192.168.110.131:3306) to ansible(192.168.110.130:3306) succeeded Master mysql1(192.168.110.131:3306) is down! Check MHA Manager logs at ansible:/var/log/masterha/app1/manager.log for details. Started automated(non-interactive) failover. Invalidated master IP address on mysql1(192.168.110.131:3306) Selected ansible(192.168.110.130:3306) as a new master. ansible(192.168.110.130:3306): OK: Applying all logs succeeded. ansible(192.168.110.130:3306): OK: Activated master IP address. mysql2(192.168.110.132:3306): OK: Slave started, replicating from ansible(192.168.110.130:3306) ansible(192.168.110.130:3306): Resetting slave info succeeded. Master failover to ansible(192.168.110.130:3306) completed successfully.
如果app.cnf配置成：mysql2是candidate_master，而ansible是no_master。但是mysql2延迟量太大，ansible拥有最新数据却不能成为master的情况下，那么MHA的manager会报错退出，自动failover失败。
[server1] hostname=mysql1 master_binlog_dir="/data/mysql/mysql3306/binlog" port=3306 [server2] hostname=mysql2 master_binlog_dir="/data/mysql/mysql3306/binlog" port=3306 candidate_master=1 check_repl_delay=0 [server3] hostname=ansible master_binlog_dir="/data/mysql/mysql3306/binlog" port=3306 no_master=1
日志如下：
Wed Mar 15 16:21:58 2017 - [warning] Global configuration file /etc/masterha_default.cnf not found. Skipping. Wed Mar 15 16:21:58 2017 - [info] Reading application default configuration from /etc/masterha/app1.cnf.. Wed Mar 15 16:21:58 2017 - [info] Reading server configuration from /etc/masterha/app1.cnf.. Wed Mar 15 16:41:35 2017 - [warning] Global configuration file /etc/masterha_default.cnf not found. Skipping. Wed Mar 15 16:41:35 2017 - [info] Reading application default configuration from /etc/masterha/app1.cnf.. Wed Mar 15 16:41:35 2017 - [info] Reading server configuration from /etc/masterha/app1.cnf.. ive Servers: Wed Mar 15 16:22:01 2017 - [info] mysql1(192.168.110.131:3306) Wed Mar 15 16:22:01 2017 - [info] mysql2(192.168.110.132:3306) Wed Mar 15 16:22:01 2017 - [info] ansible(192.168.110.130:3306) Wed Mar 15 16:22:01 2017 - [info] Alive Slaves: Wed Mar 15 16:22:01 2017 - [info] mysql2(192.168.110.132:3306) Version=5.6.34-log (oldest major version between slaves) log-bin:enabled Wed Mar 15 16:22:01 2017 - [info] GTID ON Wed Mar 15 16:22:01 2017 - [info] Replicating from mysql1(192.168.110.131:3306) Wed Mar 15 16:22:01 2017 - [info] Primary candidate for the new Master (candidate_master is set) Wed Mar 15 16:22:01 2017 - [info] ansible(192.168.110.130:3306) Version=5.6.34-log (oldest major version between slaves) log-bin:enabled Wed Mar 15 16:22:01 2017 - [info] GTID ON Wed Mar 15 16:22:01 2017 - [info] Replicating from 192.168.110.131(192.168.110.131:3306) Wed Mar 15 16:22:01 2017 - [info] Not candidate for the new Master (no_master is set) Wed Mar 15 16:22:01 2017 - [info] Current Alive Master: mysql1(192.168.110.131:3306) Wed Mar 15 16:22:01 2017 - [info] Checking slave configurations.. Wed Mar 15 16:22:01 2017 - [info] read_only=1 is not set on slave ansible(192.168.110.130:3306). Wed Mar 15 16:22:01 2017 - [info] Checking replication filtering settings.. Wed Mar 15 16:22:01 2017 - [info] binlog_do_db= , binlog_ignore_db= Wed Mar 15 16:22:01 2017 - [info] Replication filtering check ok. Wed Mar 15 16:22:01 2017 - [info] GTID (with auto-pos) is supported. Skipping all SSH and Node package checking. Wed Mar 15 16:22:02 2017 - [info] HealthCheck: SSH to mysql2 is reachable. Wed Mar 15 16:22:02 2017 - [info] Binlog server mysql2 is reachable. Wed Mar 15 16:22:02 2017 - [info] Checking recovery script configurations on mysql2(192.168.110.132:3306).. Wed Mar 15 16:22:02 2017 - [info] Executing command: save_binary_logs --command=test --start_pos=4 --binlog_dir=/tmp/binlog --output_file=/tmp/save_binary_logs_test --manager_version=0.56 --start_file=mysql-bin.000003 Wed Mar 15 16:22:02 2017 - [info] Connecting to root@192.168.110.132(mysql2:22).. Creating /tmp if not exists.. ok. Checking output directory is accessible or not.. ok. Binlog found at /tmp/binlog, up to mysql-bin.000015 Wed Mar 15 16:22:02 2017 - [info] Binlog setting check done. Wed Mar 15 16:22:02 2017 - [info] Checking SSH publickey authentication settings on the current master.. Wed Mar 15 16:22:07 2017 - [warning] HealthCheck: Got timeout on checking SSH connection to mysql1! at /usr/share/perl5/vendor_perl/MHA/HealthCheck.pm line 342. Wed Mar 15 16:22:07 2017 - [info] mysql1(192.168.110.131:3306) (current master) +--mysql2(192.168.110.132:3306) +--ansible(192.168.110.130:3306) Wed Mar 15 16:22:07 2017 - [info] Checking master_ip_failover_script status: Wed Mar 15 16:22:07 2017 - [info] /usr/bin/master_ip_failover --command=status --ssh_user=root --orig_master_host=mysql1 --orig_master_ip=192.168.110.131 --orig_master_port=3306 IN SCRIPT TEST====/sbin/ifconfig eth0:2 down==/sbin/ifconfig eth0:2 192.168.110.100;/sbin/arping -I eth0 -c 3 -s 192.168.110.100 192.168.110.2 >/dev/null 2>&1=== Checking the Status of the script.. OK Wed Mar 15 16:22:24 2017 - [info] OK. Wed Mar 15 16:22:24 2017 - [warning] shutdown_script is not defined. Wed Mar 15 16:22:24 2017 - [info] Set master ping interval 1 seconds. Wed Mar 15 16:22:24 2017 - [info] Set secondary check script: /usr/bin/masterha_secondary_check -s 192.168.110.132 -s 192.168.110.130 --user=root --master_host=mysql1 --master_ip=192.168.110.131 --master_port=3306 Wed Mar 15 16:22:24 2017 - [info] Starting ping health check on mysql1(192.168.110.131:3306).. Wed Mar 15 16:22:24 2017 - [info] Ping(SELECT) succeeded, waiting until MySQL doesn't respond.. Wed Mar 15 16:41:32 2017 - [warning] Got error on MySQL select ping: 2006 (MySQL server has gone away) Wed Mar 15 16:41:32 2017 - [info] Executing SSH check script: exit 0 Wed Mar 15 16:41:32 2017 - [info] Executing secondary network check script: /usr/bin/masterha_secondary_check -s 192.168.110.132 -s 192.168.110.130 --user=root --master_host=mysql1 --master_ip=192.168.110.131 --master_port=3306 --user=root --master_host=mysql1 --master_ip=192.168.110.131 --master_port=3306 --master_user=mha --master_password=mha --ping_type=SELECT Monitoring server 192.168.110.132 is reachable, Master is not reachable from 192.168.110.132. OK. Wed Mar 15 16:41:33 2017 - [info] HealthCheck: SSH to mysql1 is reachable. Monitoring server 192.168.110.130 is reachable, Master is not reachable from 192.168.110.130. OK. Wed Mar 15 16:41:33 2017 - [info] Master is not reachable from all other monitoring servers. Failover should start. Wed Mar 15 16:41:33 2017 - [warning] Got error on MySQL connect: 2013 (Lost connection to MySQL server at 'reading initial communication packet', system error: 111) Wed Mar 15 16:41:33 2017 - [warning] Connection failed 2 time(s).. Wed Mar 15 16:41:34 2017 - [warning] Got error on MySQL connect: 2013 (Lost connection to MySQL server at 'reading initial communication packet', system error: 111) Wed Mar 15 16:41:34 2017 - [warning] Connection failed 3 time(s).. Wed Mar 15 16:41:35 2017 - [warning] Got error on MySQL connect: 2013 (Lost connection to MySQL server at 'reading initial communication packet', system error: 111) Wed Mar 15 16:41:35 2017 - [warning] Connection failed 4 time(s).. Wed Mar 15 16:41:35 2017 - [warning] Master is not reachable from health checker! Wed Mar 15 16:41:35 2017 - [warning] Master mysql1(192.168.110.131:3306) is not reachable! Wed Mar 15 16:41:35 2017 - [warning] SSH is reachable. Wed Mar 15 16:41:35 2017 - [info] Connecting to a master server failed. Reading configuration file /etc/masterha_default.cnf and /etc/masterha/app1.cnf again, and trying to connect to all servers to check server status.. Wed Mar 15 16:41:35 2017 - [warning] Global configuration file /etc/masterha_default.cnf not found. Skipping. Wed Mar 15 16:41:35 2017 - [info] Reading application default configuration from /etc/masterha/app1.cnf.. Wed Mar 15 16:41:35 2017 - [info] Reading server configuration from /etc/masterha/app1.cnf.. Wed Mar 15 16:41:35 2017 - [info] GTID failover mode = 1 Wed Mar 15 16:41:35 2017 - [info] Dead Servers: Wed Mar 15 16:41:35 2017 - [info] mysql1(192.168.110.131:3306) Wed Mar 15 16:41:35 2017 - [info] Alive Servers: Wed Mar 15 16:41:35 2017 - [info] mysql2(192.168.110.132:3306) Wed Mar 15 16:41:35 2017 - [info] ansible(192.168.110.130:3306) Wed Mar 15 16:41:35 2017 - [info] Alive Slaves: Wed Mar 15 16:41:35 2017 - [info] mysql2(192.168.110.132:3306) Version=5.6.34-log (oldest major version between slaves) log-bin:enabled Wed Mar 15 16:41:35 2017 - [info] GTID ON Wed Mar 15 16:41:35 2017 - [info] Replicating from mysql1(192.168.110.131:3306) Wed Mar 15 16:41:35 2017 - [info] Primary candidate for the new Master (candidate_master is set) Wed Mar 15 16:41:35 2017 - [info] ansible(192.168.110.130:3306) Version=5.6.34-log (oldest major version between slaves) log-bin:enabled Wed Mar 15 16:41:35 2017 - [info] GTID ON Wed Mar 15 16:41:35 2017 - [info] Replicating from 192.168.110.131(192.168.110.131:3306) Wed Mar 15 16:41:35 2017 - [info] Not candidate for the new Master (no_master is set) Wed Mar 15 16:41:35 2017 - [info] Checking slave configurations.. Wed Mar 15 16:41:35 2017 - [info] read_only=1 is not set on slave ansible(192.168.110.130:3306). Wed Mar 15 16:41:35 2017 - [info] Checking replication filtering settings.. Wed Mar 15 16:41:35 2017 - [info] Replication filtering check ok. Wed Mar 15 16:41:35 2017 - [info] Master is down! Wed Mar 15 16:41:35 2017 - [info] Terminating monitoring script. Wed Mar 15 16:41:35 2017 - [info] Got exit code 20 (Master dead). Wed Mar 15 16:41:35 2017 - [info] MHA::MasterFailover version 0.56. Wed Mar 15 16:41:35 2017 - [info] Starting master failover. Wed Mar 15 16:41:35 2017 - [info] Wed Mar 15 16:41:35 2017 - [info] * Phase 1: Configuration Check Phase.. Wed Mar 15 16:41:35 2017 - [info] Wed Mar 15 16:41:36 2017 - [info] HealthCheck: SSH to mysql2 is reachable. Wed Mar 15 16:41:36 2017 - [info] Binlog server mysql2 is reachable. Wed Mar 15 16:41:36 2017 - [info] GTID failover mode = 1 Wed Mar 15 16:41:36 2017 - [info] Dead Servers: Wed Mar 15 16:41:36 2017 - [info] mysql1(192.168.110.131:3306) Wed Mar 15 16:41:36 2017 - [info] Checking master reachability via MySQL(double check)... Wed Mar 15 16:41:36 2017 - [info] ok. Wed Mar 15 16:41:36 2017 - [info] Alive Servers: Wed Mar 15 16:41:36 2017 - [info] mysql2(192.168.110.132:3306) Wed Mar 15 16:41:36 2017 - [info] ansible(192.168.110.130:3306) Wed Mar 15 16:41:36 2017 - [info] Alive Slaves: Wed Mar 15 16:41:36 2017 - [info] mysql2(192.168.110.132:3306) Version=5.6.34-log (oldest major version between slaves) log-bin:enabled Wed Mar 15 16:41:36 2017 - [info] GTID ON Wed Mar 15 16:41:36 2017 - [info] Replicating from mysql1(192.168.110.131:3306) Wed Mar 15 16:41:36 2017 - [info] Primary candidate for the new Master (candidate_master is set) Wed Mar 15 16:41:36 2017 - [info] ansible(192.168.110.130:3306) Version=5.6.34-log (oldest major version between slaves) log-bin:enabled Wed Mar 15 16:41:36 2017 - [info] GTID ON Wed Mar 15 16:41:36 2017 - [info] Replicating from 192.168.110.131(192.168.110.131:3306) Wed Mar 15 16:41:36 2017 - [info] Not candidate for the new Master (no_master is set) Wed Mar 15 16:41:36 2017 - [info] Starting GTID based failover. Wed Mar 15 16:41:36 2017 - [info] Wed Mar 15 16:41:36 2017 - [info] ** Phase 1: Configuration Check Phase completed. Wed Mar 15 16:41:36 2017 - [info] Wed Mar 15 16:41:36 2017 - [info] * Phase 2: Dead Master Shutdown Phase.. Wed Mar 15 16:41:36 2017 - [info] Wed Mar 15 16:41:36 2017 - [info] Forcing shutdown so that applications never connect to the current master.. Wed Mar 15 16:41:36 2017 - [info] Executing master IP deactivation script: Wed Mar 15 16:41:36 2017 - [info] /usr/bin/master_ip_failover --orig_master_host=mysql1 --orig_master_ip=192.168.110.131 --orig_master_port=3306 --command=stopssh --ssh_user=root IN SCRIPT TEST====/sbin/ifconfig eth0:2 down==/sbin/ifconfig eth0:2 192.168.110.100;/sbin/arping -I eth0 -c 3 -s 192.168.110.100 192.168.110.2 >/dev/null 2>&1=== Disabling the VIP on old master: mysql1 Wed Mar 15 16:41:36 2017 - [info] done. Wed Mar 15 16:41:36 2017 - [warning] shutdown_script is not set. Skipping explicit shutting down of the dead master. Wed Mar 15 16:41:36 2017 - [info] * Phase 2: Dead Master Shutdown Phase completed. Wed Mar 15 16:41:36 2017 - [info] Wed Mar 15 16:41:36 2017 - [info] * Phase 3: Master Recovery Phase.. Wed Mar 15 16:41:36 2017 - [info] Wed Mar 15 16:41:36 2017 - [info] * Phase 3.1: Getting Latest Slaves Phase.. Wed Mar 15 16:41:36 2017 - [info] Wed Mar 15 16:41:36 2017 - [info] The latest binary log file/position on all slaves is mysql-bin.000003:311461358 Wed Mar 15 16:41:36 2017 - [info] Retrieved Gtid Set: c897448e-07c8-11e7-8af3-000c29918f29:575-1104 Wed Mar 15 16:41:36 2017 - [info] Latest slaves (Slaves that received relay log files to the latest): Wed Mar 15 16:41:36 2017 - [info] ansible(192.168.110.130:3306) Version=5.6.34-log (oldest major version between slaves) log-bin:enabled Wed Mar 15 16:41:36 2017 - [info] GTID ON Wed Mar 15 16:41:36 2017 - [info] Replicating from 192.168.110.131(192.168.110.131:3306) Wed Mar 15 16:41:36 2017 - [info] Not candidate for the new Master (no_master is set) Wed Mar 15 16:41:36 2017 - [info] The oldest binary log file/position on all slaves is mysql-bin.000003:94335516 Wed Mar 15 16:41:36 2017 - [info] Retrieved Gtid Set: c897448e-07c8-11e7-8af3-000c29918f29:575-756 Wed Mar 15 16:41:36 2017 - [info] Oldest slaves: Wed Mar 15 16:41:36 2017 - [info] mysql2(192.168.110.132:3306) Version=5.6.34-log (oldest major version between slaves) log-bin:enabled Wed Mar 15 16:41:36 2017 - [info] GTID ON Wed Mar 15 16:41:36 2017 - [info] Replicating from mysql1(192.168.110.131:3306) Wed Mar 15 16:41:36 2017 - [info] Primary candidate for the new Master (candidate_master is set) Wed Mar 15 16:41:36 2017 - [info] Wed Mar 15 16:41:36 2017 - [info] * Phase 3.3: Determining New Master Phase.. Wed Mar 15 16:41:36 2017 - [info] Wed Mar 15 16:41:36 2017 - [warning] Slave mysql2(192.168.110.132:3306) SQL Thread delays too much. Latest log file:mysql-bin.000003:311461358, Current log file:mysql-bin.000003:84722518. This server is not selected as a new master because recovery will take long time. Wed Mar 15 16:41:36 2017 - [info] Searching new master from slaves.. Wed Mar 15 16:41:36 2017 - [info] Candidate masters from the configuration file: Wed Mar 15 16:41:36 2017 - [info] mysql2(192.168.110.132:3306) Version=5.6.34-log (oldest major version between slaves) log-bin:enabled Wed Mar 15 16:41:36 2017 - [info] GTID ON Wed Mar 15 16:41:36 2017 - [info] Replicating from mysql1(192.168.110.131:3306) Wed Mar 15 16:41:36 2017 - [info] Primary candidate for the new Master (candidate_master is set) Wed Mar 15 16:41:36 2017 - [info] Non-candidate masters: Wed Mar 15 16:41:36 2017 - [info] mysql2(192.168.110.132:3306) Version=5.6.34-log (oldest major version between slaves) log-bin:enabled Wed Mar 15 16:41:36 2017 - [info] GTID ON Wed Mar 15 16:41:36 2017 - [info] Replicating from mysql1(192.168.110.131:3306) Wed Mar 15 16:41:36 2017 - [info] Primary candidate for the new Master (candidate_master is set) Wed Mar 15 16:41:36 2017 - [info] ansible(192.168.110.130:3306) Version=5.6.34-log (oldest major version between slaves) log-bin:enabled Wed Mar 15 16:41:36 2017 - [info] GTID ON Wed Mar 15 16:41:36 2017 - [info] Replicating from 192.168.110.131(192.168.110.131:3306) Wed Mar 15 16:41:36 2017 - [info] Not candidate for the new Master (no_master is set) Wed Mar 15 16:41:36 2017 - [info] Searching from candidate_master slaves which have received the latest relay log events.. Wed Mar 15 16:41:36 2017 - [info] Not found. Wed Mar 15 16:41:36 2017 - [info] Searching from all candidate_master slaves.. Wed Mar 15 16:41:36 2017 - [info] Not found. Wed Mar 15 16:41:36 2017 - [info] Searching from all slaves which have received the latest relay log events.. Wed Mar 15 16:41:36 2017 - [info] Not found. Wed Mar 15 16:41:36 2017 - [info] Searching from all slaves.. Wed Mar 15 16:41:36 2017 - [info] Not found. Wed Mar 15 16:41:36 2017 - [error][/usr/share/perl5/vendor_perl/MHA/MasterFailover.pm, ln970] None of existing slaves matches as a new master. Maybe preferred node is misconfigured or all slaves are too far behind. Wed Mar 15 16:41:36 2017 - [error][/usr/share/perl5/vendor_perl/MHA/ManagerUtil.pm, ln177] Got ERROR: at /usr/bin/masterha_manager line 65 Wed Mar 15 16:41:36 2017 - [info] ----- Failover Report ----- app1: MySQL Master failover mysql1(192.168.110.131:3306) Master mysql1(192.168.110.131:3306) is down! Check MHA Manager logs at ansible:/var/log/masterha/app1/manager.log for details. Started automated(non-interactive) failover. Invalidated master IP address on mysql1(192.168.110.131:3306) None of existing slaves matches as a new master. Maybe preferred node is misconfigured or all slaves are too far behind. Got Error so couldn't continue failover from here.
2、手工failover:
脚本：
vim masterha_switch.sh
#!/bin/sh
conf="/etc/masterha/app1.cnf"
dead_master="mysql1"
new_master="mysql2"
port="3306"
function manual_failover(){
##人工切换需要停掉manager进程
/usr/bin/masterha_stop --conf=/etc/masterha/app1.cnf
/usr/bin/masterha_master_switch --conf=${conf} --master_state=dead --dead_master_host=${dead_master} --dead_master_port=${port} --new_master_host=${new_master} --new_master_port=${port} --ignore_last_failover
}
function manual_online_change(){
##人工切换需要停掉manager进程
/usr/bin/masterha_stop --conf=/etc/masterha/app1.cnf
/usr/bin/masterha_master_switch --conf=${conf} --master_state=alive --new_master_host=${new_master} --new_master_port=${port} --orig_master_is_new_slave --running_updates_limit=10000 --interactive=1 < /dev/null > /var/log/masterha/app1/manual_online_change.log 2>&1 &
}
case "$1" in
manual_failover)
manual_failover
;;
manual_online_change)
manual_online_change
;;
*)
echo "Usage: $0 manual_failover|manual_online_change"
esac前提条件：
1、mysql1（即主库发生故障无法连接）异常，这里直接将mysql1的数据库服务shutdown即可。
2、必须关闭MHA的manager进程。
日志如下：
Wed Mar 15 12:36:23 2017 - [warning] Global configuration file /etc/masterha_default.cnf not found. Skipping. Wed Mar 15 12:36:23 2017 - [info] Reading application default configuration from /etc/masterha/app1.cnf.. Wed Mar 15 12:36:23 2017 - [info] Reading server configuration from /etc/masterha/app1.cnf.. Wed Mar 15 12:36:23 2017 - [info] MHA::MasterFailover version 0.56. Wed Mar 15 12:36:23 2017 - [info] Starting master failover. Wed Mar 15 12:36:23 2017 - [info] Wed Mar 15 12:36:23 2017 - [info] * Phase 1: Configuration Check Phase.. Wed Mar 15 12:36:23 2017 - [info] Wed Mar 15 12:36:23 2017 - [info] HealthCheck: SSH to mysql2 is reachable. Wed Mar 15 12:36:23 2017 - [info] Binlog server mysql2 is reachable. Wed Mar 15 12:36:23 2017 - [info] GTID failover mode = 1 Wed Mar 15 12:36:23 2017 - [info] Dead Servers: Wed Mar 15 12:36:23 2017 - [info] mysql1(192.168.110.131:3306) Wed Mar 15 12:36:23 2017 - [info] Checking master reachability via MySQL(double check)... Wed Mar 15 12:36:23 2017 - [info] ok. Wed Mar 15 12:36:23 2017 - [info] Alive Servers: Wed Mar 15 12:36:23 2017 - [info] mysql2(192.168.110.132:3306) Wed Mar 15 12:36:23 2017 - [info] ansible(192.168.110.130:3306) Wed Mar 15 12:36:23 2017 - [info] Alive Slaves: Wed Mar 15 12:36:23 2017 - [info] mysql2(192.168.110.132:3306) Version=5.6.34-log (oldest major version between slaves) log-bin:enabled Wed Mar 15 12:36:23 2017 - [info] GTID ON Wed Mar 15 12:36:23 2017 - [info] Replicating from mysql1(192.168.110.131:3306) Wed Mar 15 12:36:23 2017 - [info] Primary candidate for the new Master (candidate_master is set) Wed Mar 15 12:36:23 2017 - [info] ansible(192.168.110.130:3306) Version=5.6.34-log (oldest major version between slaves) log-bin:enabled Wed Mar 15 12:36:23 2017 - [info] GTID ON Wed Mar 15 12:36:23 2017 - [info] Replicating from 192.168.110.131(192.168.110.131:3306) Master mysql1(192.168.110.131:3306) is dead. Proceed? (yes/NO): yes Wed Mar 15 12:36:29 2017 - [info] Starting GTID based failover. Wed Mar 15 12:36:29 2017 - [info] Wed Mar 15 12:36:29 2017 - [info] ** Phase 1: Configuration Check Phase completed. Wed Mar 15 12:36:29 2017 - [info] Wed Mar 15 12:36:29 2017 - [info] * Phase 2: Dead Master Shutdown Phase.. Wed Mar 15 12:36:29 2017 - [info] Wed Mar 15 12:36:29 2017 - [info] HealthCheck: SSH to mysql1 is reachable. Wed Mar 15 12:36:30 2017 - [info] Forcing shutdown so that applications never connect to the current master.. Wed Mar 15 12:36:30 2017 - [info] Executing master IP deactivation script: Wed Mar 15 12:36:30 2017 - [info] /usr/bin/master_ip_failover --orig_master_host=mysql1 --orig_master_ip=192.168.110.131 --orig_master_port=3306 --command=stopssh --ssh_user=root IN SCRIPT TEST====/sbin/ifconfig eth0:2 down==/sbin/ifconfig eth0:2 192.168.110.100;/sbin/arping -I eth0 -c 3 -s 192.168.110.100 192.168.110.2 >/dev/null 2>&1=== Disabling the VIP on old master: mysql1 Wed Mar 15 12:36:30 2017 - [info] done. Wed Mar 15 12:36:30 2017 - [warning] shutdown_script is not set. Skipping explicit shutting down of the dead master. Wed Mar 15 12:36:30 2017 - [info] * Phase 2: Dead Master Shutdown Phase completed. Wed Mar 15 12:36:30 2017 - [info] Wed Mar 15 12:36:30 2017 - [info] * Phase 3: Master Recovery Phase.. Wed Mar 15 12:36:30 2017 - [info] Wed Mar 15 12:36:30 2017 - [info] * Phase 3.1: Getting Latest Slaves Phase.. Wed Mar 15 12:36:30 2017 - [info] Wed Mar 15 12:36:30 2017 - [info] The latest binary log file/position on all slaves is mysql-bin.000002:191 Wed Mar 15 12:36:30 2017 - [info] Latest slaves (Slaves that received relay log files to the latest): Wed Mar 15 12:36:30 2017 - [info] mysql2(192.168.110.132:3306) Version=5.6.34-log (oldest major version between slaves) log-bin:enabled Wed Mar 15 12:36:30 2017 - [info] GTID ON Wed Mar 15 12:36:30 2017 - [info] Replicating from mysql1(192.168.110.131:3306) Wed Mar 15 12:36:30 2017 - [info] Primary candidate for the new Master (candidate_master is set) Wed Mar 15 12:36:30 2017 - [info] ansible(192.168.110.130:3306) Version=5.6.34-log (oldest major version between slaves) log-bin:enabled Wed Mar 15 12:36:30 2017 - [info] GTID ON Wed Mar 15 12:36:30 2017 - [info] Replicating from 192.168.110.131(192.168.110.131:3306) Wed Mar 15 12:36:30 2017 - [info] The oldest binary log file/position on all slaves is mysql-bin.000002:191 Wed Mar 15 12:36:30 2017 - [info] Oldest slaves: Wed Mar 15 12:36:30 2017 - [info] mysql2(192.168.110.132:3306) Version=5.6.34-log (oldest major version between slaves) log-bin:enabled Wed Mar 15 12:36:30 2017 - [info] GTID ON Wed Mar 15 12:36:30 2017 - [info] Replicating from mysql1(192.168.110.131:3306) Wed Mar 15 12:36:30 2017 - [info] Primary candidate for the new Master (candidate_master is set) Wed Mar 15 12:36:30 2017 - [info] ansible(192.168.110.130:3306) Version=5.6.34-log (oldest major version between slaves) log-bin:enabled Wed Mar 15 12:36:30 2017 - [info] GTID ON Wed Mar 15 12:36:30 2017 - [info] Replicating from 192.168.110.131(192.168.110.131:3306) Wed Mar 15 12:36:30 2017 - [info] Wed Mar 15 12:36:30 2017 - [info] * Phase 3.3: Determining New Master Phase.. Wed Mar 15 12:36:30 2017 - [info] Wed Mar 15 12:36:30 2017 - [info] mysql2 can be new master. Wed Mar 15 12:36:30 2017 - [info] New master is mysql2(192.168.110.132:3306) Wed Mar 15 12:36:30 2017 - [info] Starting master failover.. Wed Mar 15 12:36:30 2017 - [info] From: mysql1(192.168.110.131:3306) (current master) +--mysql2(192.168.110.132:3306) +--ansible(192.168.110.130:3306) To: mysql2(192.168.110.132:3306) (new master) +--ansible(192.168.110.130:3306) Starting master switch from mysql1(192.168.110.131:3306) to mysql2(192.168.110.132:3306)? (yes/NO): yes Wed Mar 15 12:36:35 2017 - [info] New master decided manually is mysql2(192.168.110.132:3306) Wed Mar 15 12:36:35 2017 - [info] Wed Mar 15 12:36:35 2017 - [info] * Phase 3.3: New Master Recovery Phase.. Wed Mar 15 12:36:35 2017 - [info] Wed Mar 15 12:36:35 2017 - [info] Waiting all logs to be applied.. Wed Mar 15 12:36:35 2017 - [info] done. Wed Mar 15 12:36:35 2017 - [info] -- Saving binlog from host mysql2 started, pid: 43271 Wed Mar 15 12:36:36 2017 - [info] Wed Mar 15 12:36:36 2017 - [info] Log messages from mysql2 ... Wed Mar 15 12:36:36 2017 - [info] Wed Mar 15 12:36:35 2017 - [info] Fetching binary logs from binlog server mysql2.. Wed Mar 15 12:36:35 2017 - [info] Executing binlog save command: save_binary_logs --command=save --start_file=mysql-bin.000002 --start_pos=191 --output_file=/tmp/saved_binlog_binlog1_20170315123623.binlog --handle_raw_binlog=0 --skip_filter=1 --disable_log_bin=0 --manager_version=0.56 --oldest_version=5.6.34-log --binlog_dir=/tmp/binlog Creating /tmp if not exists.. ok. Concat binary/relay logs from mysql-bin.000002 pos 191 to mysql-bin.000015 EOF into /tmp/saved_binlog_binlog1_20170315123623.binlog .. No additional binlog events found. Event not exists. Wed Mar 15 12:36:36 2017 - [info] Additional events were not found from the binlog server. No need to save. Wed Mar 15 12:36:36 2017 - [info] End of log messages from mysql2. Wed Mar 15 12:36:36 2017 - [info] No binlog events found from mysql2. Skipping Wed Mar 15 12:36:36 2017 - [info] Getting new master's binlog name and position.. Wed Mar 15 12:36:36 2017 - [info] mysql-bin.000001:320182589 Wed Mar 15 12:36:36 2017 - [info] All other slaves should start replication from here. Statement should be: CHANGE MASTER TO MASTER_HOST='mysql2 or 192.168.110.132', MASTER_PORT=3306, MASTER_AUTO_POSITION=1, MASTER_USER='repl', MASTER_PASSWORD='xxx'; Wed Mar 15 12:36:36 2017 - [info] Master Recovery succeeded. File:Pos:Exec_Gtid_Set: mysql-bin.000001, 320182589, c897448e-07c8-11e7-8af3-000c29918f29:1-574 Wed Mar 15 12:36:36 2017 - [info] Executing master IP activate script: Wed Mar 15 12:36:36 2017 - [info] /usr/bin/master_ip_failover --command=start --ssh_user=root --orig_master_host=mysql1 --orig_master_ip=192.168.110.131 --orig_master_port=3306 --new_master_host=mysql2 --new_master_ip=192.168.110.132 --new_master_port=3306 --new_master_user='mha' --new_master_password='mha' Unknown option: new_master_user Unknown option: new_master_password IN SCRIPT TEST====/sbin/ifconfig eth0:2 down==/sbin/ifconfig eth0:2 192.168.110.100;/sbin/arping -I eth0 -c 3 -s 192.168.110.100 192.168.110.2 >/dev/null 2>&1=== Enabling the VIP - 192.168.110.100 on the new master - mysql2 Wed Mar 15 12:36:39 2017 - [info] OK. Wed Mar 15 12:36:39 2017 - [info] Setting read_only=0 on mysql2(192.168.110.132:3306).. Wed Mar 15 12:36:39 2017 - [info] ok. Wed Mar 15 12:36:39 2017 - [info] ** Finished master recovery successfully. Wed Mar 15 12:36:39 2017 - [info] * Phase 3: Master Recovery Phase completed. Wed Mar 15 12:36:39 2017 - [info] Wed Mar 15 12:36:39 2017 - [info] * Phase 4: Slaves Recovery Phase.. Wed Mar 15 12:36:39 2017 - [info] Wed Mar 15 12:36:39 2017 - [info] Wed Mar 15 12:36:39 2017 - [info] * Phase 4.1: Starting Slaves in parallel.. Wed Mar 15 12:36:39 2017 - [info] Wed Mar 15 12:36:39 2017 - [info] -- Slave recovery on host ansible(192.168.110.130:3306) started, pid: 43277. Check tmp log /var/log/masterha/app1/ansible_3306_20170315123623.log if it takes time.. Wed Mar 15 12:36:40 2017 - [info] Wed Mar 15 12:36:40 2017 - [info] Log messages from ansible ... Wed Mar 15 12:36:40 2017 - [info] Wed Mar 15 12:36:39 2017 - [info] Resetting slave ansible(192.168.110.130:3306) and starting replication from the new master mysql2(192.168.110.132:3306).. Wed Mar 15 12:36:39 2017 - [info] Executed CHANGE MASTER. Wed Mar 15 12:36:40 2017 - [info] Slave started. Wed Mar 15 12:36:40 2017 - [info] gtid_wait(c897448e-07c8-11e7-8af3-000c29918f29:1-574) completed on ansible(192.168.110.130:3306). Executed 0 events. Wed Mar 15 12:36:40 2017 - [info] End of log messages from ansible. Wed Mar 15 12:36:40 2017 - [info] -- Slave on host ansible(192.168.110.130:3306) started. Wed Mar 15 12:36:40 2017 - [info] All new slave servers recovered successfully. Wed Mar 15 12:36:40 2017 - [info] Wed Mar 15 12:36:40 2017 - [info] * Phase 5: New master cleanup phase.. Wed Mar 15 12:36:40 2017 - [info] Wed Mar 15 12:36:40 2017 - [info] Resetting slave info on the new master.. Wed Mar 15 12:36:40 2017 - [info] mysql2: Resetting slave info succeeded. Wed Mar 15 12:36:40 2017 - [info] Master failover to mysql2(192.168.110.132:3306) completed successfully. Wed Mar 15 12:36:40 2017 - [info] ----- Failover Report ----- app1: MySQL Master failover mysql1(192.168.110.131:3306) to mysql2(192.168.110.132:3306) succeeded Master mysql1(192.168.110.131:3306) is down! Check MHA Manager logs at ansible for details. Started manual(interactive) failover. Invalidated master IP address on mysql1(192.168.110.131:3306) Selected mysql2(192.168.110.132:3306) as a new master. mysql2(192.168.110.132:3306): OK: Applying all logs succeeded. mysql2(192.168.110.132:3306): OK: Activated master IP address. ansible(192.168.110.130:3306): OK: Slave started, replicating from mysql2(192.168.110.132:3306) mysql2(192.168.110.132:3306): Resetting slave info succeeded. Master failover to mysql2(192.168.110.132:3306) completed successfully
3、手工online_change：
前提条件：
1、为了保证数据的高一致性，所有slave的IO线程、SQL线程必须都在运行。
2、slave的Seconds_Behind_Master也必须小于running_updates_limit，如果不指定该参数值，默认为1s。这样的话，slave但凡有延迟的话，也无法online_change成功。
3、master端，通过show processlist输出，没有一个更新花费的时间大于running_updates_limit秒。
4、停止MHA的manager进程
日志如下：
Wed Mar 15 13:00:36 2017 - [info] MHA::MasterRotate version 0.56.
Wed Mar 15 13:00:36 2017 - [info] Starting online master switch..
Wed Mar 15 13:00:36 2017 - [info]
Wed Mar 15 13:00:36 2017 - [info] * Phase 1: Configuration Check Phase..
Wed Mar 15 13:00:36 2017 - [info]
Wed Mar 15 13:00:36 2017 - [warning] Global configuration file /etc/masterha_default.cnf not found. Skipping.
Wed Mar 15 13:00:36 2017 - [info] Reading application default configuration from /etc/masterha/app1.cnf..
Wed Mar 15 13:00:36 2017 - [info] Reading server configuration from /etc/masterha/app1.cnf..
Wed Mar 15 13:00:36 2017 - [info] GTID failover mode = 1
Wed Mar 15 13:00:36 2017 - [info] Current Alive Master: mysql1(192.168.110.131:3306)
Wed Mar 15 13:00:36 2017 - [info] Alive Slaves:
Wed Mar 15 13:00:36 2017 - [info] mysql2(192.168.110.132:3306) Version=5.6.34-log (oldest major version between slaves) log-bin:enabled
Wed Mar 15 13:00:36 2017 - [info] GTID ON
Wed Mar 15 13:00:36 2017 - [info] Replicating from mysql1(192.168.110.131:3306)
Wed Mar 15 13:00:36 2017 - [info] Primary candidate for the new Master (candidate_master is set)
Wed Mar 15 13:00:36 2017 - [info] ansible(192.168.110.130:3306) Version=5.6.34-log (oldest major version between slaves) log-bin:enabled
Wed Mar 15 13:00:36 2017 - [info] GTID ON
Wed Mar 15 13:00:36 2017 - [info] Replicating from 192.168.110.131(192.168.110.131:3306)
It is better to execute FLUSH NO_WRITE_TO_BINLOG TABLES on the master before switching. Is it ok to execute on mysql1(192.168.110.131:3306)? (YES/no): yes
Wed Mar 15 13:00:38 2017 - [info] Executing FLUSH NO_WRITE_TO_BINLOG TABLES. This may take long time..
Wed Mar 15 13:00:38 2017 - [info] ok.
Wed Mar 15 13:00:38 2017 - [info] Checking MHA is not monitoring or doing failover..
Wed Mar 15 13:00:38 2017 - [info] Checking replication health on mysql2..
Wed Mar 15 13:00:38 2017 - [info] ok.
Wed Mar 15 13:00:38 2017 - [info] Checking replication health on ansible..
Wed Mar 15 13:00:38 2017 - [info] ok.
Wed Mar 15 13:00:38 2017 - [info] mysql2 can be new master.
Wed Mar 15 13:00:38 2017 - [info]
From:
mysql1(192.168.110.131:3306) (current master)
+--mysql2(192.168.110.132:3306)
+--ansible(192.168.110.130:3306)
To:
mysql2(192.168.110.132:3306) (new master)
+--ansible(192.168.110.130:3306)
+--mysql1(192.168.110.131:3306)
Starting master switch from mysql1(192.168.110.131:3306) to mysql2(192.168.110.132:3306)? (yes/NO): yes
Wed Mar 15 13:00:39 2017 - [info] Checking whether mysql2(192.168.110.132:3306) is ok for the new master..
Wed Mar 15 13:00:39 2017 - [info] ok.
Wed Mar 15 13:00:39 2017 - [info] mysql1(192.168.110.131:3306): SHOW SLAVE STATUS returned empty result. To check replication filtering rules, temporarily executing CHANGE MASTER to a dummy host.
Wed Mar 15 13:00:39 2017 - [info] mysql1(192.168.110.131:3306): Resetting slave pointing to the dummy host.
Wed Mar 15 13:00:39 2017 - [info] ** Phase 1: Configuration Check Phase completed.
Wed Mar 15 13:00:39 2017 - [info]
Wed Mar 15 13:00:39 2017 - [info] * Phase 2: Rejecting updates Phase..
Wed Mar 15 13:00:39 2017 - [info]
Wed Mar 15 13:00:39 2017 - [info] Executing master ip online change script to disable write on the current master:
Wed Mar 15 13:00:39 2017 - [info] /usr/bin/master_ip_online_change --command=stop --orig_master_host=mysql1 --orig_master_ip=192.168.110.131 --orig_master_port=3306 --orig_master_user='mha' --orig_master_password='mha' --new_master_host=mysql2 --new_master_ip=192.168.110.132 --new_master_port=3306 --new_master_user='mha' --new_master_password='mha' --orig_master_ssh_user=root --new_master_ssh_user=root --orig_master_is_new_slave
Wed Mar 15 13:00:39 2017 797307 Set read_only on the new master.. ok.
Wed Mar 15 13:00:39 2017 800510 Waiting all running 2 threads are disconnected.. (max 1500 milliseconds)
{'Time' => '57','Command' => 'Binlog Dump GTID','db' => undef,'Id' => '148','Info' => undef,'User' => 'repl','State' => 'Master has sent all binlog to slave; waiting for binlog to be updated','Host' => '192.168.110.130:43084'}
{'Time' => '56','Command' => 'Binlog Dump GTID','db' => undef,'Id' => '149','Info' => undef,'User' => 'repl','State' => 'Master has sent all binlog to slave; waiting for binlog to be updated','Host' => '192.168.110.132:47611'}
Wed Mar 15 13:00:40 2017 305276 Waiting all running 2 threads are disconnected.. (max 1000 milliseconds)
{'Time' => '58','Command' => 'Binlog Dump GTID','db' => undef,'Id' => '148','Info' => undef,'User' => 'repl','State' => 'Master has sent all binlog to slave; waiting for binlog to be updated','Host' => '192.168.110.130:43084'}
{'Time' => '57','Command' => 'Binlog Dump GTID','db' => undef,'Id' => '149','Info' => undef,'User' => 'repl','State' => 'Master has sent all binlog to slave; waiting for binlog to be updated','Host' => '192.168.110.132:47611'}
Wed Mar 15 13:00:40 2017 809931 Waiting all running 2 threads are disconnected.. (max 500 milliseconds)
{'Time' => '58','Command' => 'Binlog Dump GTID','db' => undef,'Id' => '148','Info' => undef,'User' => 'repl','State' => 'Master has sent all binlog to slave; waiting for binlog to be updated','Host' => '192.168.110.130:43084'}
{'Time' => '57','Command' => 'Binlog Dump GTID','db' => undef,'Id' => '149','Info' => undef,'User' => 'repl','State' => 'Master has sent all binlog to slave; waiting for binlog to be updated','Host' => '192.168.110.132:47611'}
Wed Mar 15 13:00:41 2017 314315 Set read_only=1 on the orig master.. ok.
Wed Mar 15 13:00:41 2017 317389 Waiting all running 2 queries are disconnected.. (max 500 milliseconds)
{'Time' => '59','Command' => 'Binlog Dump GTID','db' => undef,'Id' => '148','Info' => undef,'User' => 'repl','State' => 'Master has sent all binlog to slave; waiting for binlog to be updated','Host' => '192.168.110.130:43084'}
{'Time' => '58','Command' => 'Binlog Dump GTID','db' => undef,'Id' => '149','Info' => undef,'User' => 'repl','State' => 'Master has sent all binlog to slave; waiting for binlog to be updated','Host' => '192.168.110.132:47611'}
Wed Mar 15 13:00:41 2017 819707 Killing all application threads..
Wed Mar 15 13:00:41 2017 822709 done.
Disabling the VIP on old master: mysql1
Wed Mar 15 13:00:42 2017 - [info] ok.
Wed Mar 15 13:00:42 2017 - [info] Locking all tables on the orig master to reject updates from everybody (including root):
Wed Mar 15 13:00:42 2017 - [info] Executing FLUSH TABLES WITH READ LOCK..
Wed Mar 15 13:00:42 2017 - [info] ok.
Wed Mar 15 13:00:42 2017 - [info] Orig master binlog:pos is mysql-bin.000003:191.
Wed Mar 15 13:00:42 2017 - [info] Waiting to execute all relay logs on mysql2(192.168.110.132:3306)..
Wed Mar 15 13:00:42 2017 - [info] master_pos_wait(mysql-bin.000003:191) completed on mysql2(192.168.110.132:3306). Executed 0 events.
Wed Mar 15 13:00:42 2017 - [info] done.
Wed Mar 15 13:00:42 2017 - [info] Getting new master's binlog name and position..
Wed Mar 15 13:00:42 2017 - [info] mysql-bin.000001:320182589
Wed Mar 15 13:00:42 2017 - [info] All other slaves should start replication from here. Statement should be: CHANGE MASTER TO MASTER_HOST='mysql2 or 192.168.110.132', MASTER_PORT=3306, MASTER_AUTO_POSITION=1, MASTER_USER='repl', MASTER_PASSWORD='xxx';
Wed Mar 15 13:00:42 2017 - [info] Executing master ip online change script to allow write on the new master:
Wed Mar 15 13:00:42 2017 - [info] /usr/bin/master_ip_online_change --command=start --orig_master_host=mysql1 --orig_master_ip=192.168.110.131 --orig_master_port=3306 --orig_master_user='mha' --orig_master_password='mha' --new_master_host=mysql2 --new_master_ip=192.168.110.132 --new_master_port=3306 --new_master_user='mha' --new_master_password='mha' --orig_master_ssh_user=root --new_master_ssh_user=root --orig_master_is_new_slave
Wed Mar 15 13:00:42 2017 202426 Set read_only=0 on the new master.
Enabling the VIP - 192.168.110.100 on the new master - mysql2
Wed Mar 15 13:00:45 2017 - [info] ok.
Wed Mar 15 13:00:45 2017 - [info]
Wed Mar 15 13:00:45 2017 - [info] * Switching slaves in parallel..
Wed Mar 15 13:00:45 2017 - [info]
Wed Mar 15 13:00:45 2017 - [info] -- Slave switch on host ansible(192.168.110.130:3306) started, pid: 43378
Wed Mar 15 13:00:45 2017 - [info]
Wed Mar 15 13:00:46 2017 - [info] Log messages from ansible ...
Wed Mar 15 13:00:46 2017 - [info]
Wed Mar 15 13:00:45 2017 - [info] Waiting to execute all relay logs on ansible(192.168.110.130:3306)..
Wed Mar 15 13:00:45 2017 - [info] master_pos_wait(mysql-bin.000003:191) completed on ansible(192.168.110.130:3306). Executed 0 events.
Wed Mar 15 13:00:45 2017 - [info] done.
Wed Mar 15 13:00:45 2017 - [info] Resetting slave ansible(192.168.110.130:3306) and starting replication from the new master mysql2(192.168.110.132:3306)..
Wed Mar 15 13:00:45 2017 - [info] Executed CHANGE MASTER.
Wed Mar 15 13:00:46 2017 - [info] Slave started.
Wed Mar 15 13:00:46 2017 - [info] End of log messages from ansible ...
Wed Mar 15 13:00:46 2017 - [info]
Wed Mar 15 13:00:46 2017 - [info] -- Slave switch on host ansible(192.168.110.130:3306) succeeded.
Wed Mar 15 13:00:46 2017 - [info] Unlocking all tables on the orig master:
Wed Mar 15 13:00:46 2017 - [info] Executing UNLOCK TABLES..
Wed Mar 15 13:00:46 2017 - [info] ok.
Wed Mar 15 13:00:46 2017 - [info] Starting orig master as a new slave..
Wed Mar 15 13:00:46 2017 - [info] Resetting slave mysql1(192.168.110.131:3306) and starting replication from the new master mysql2(192.168.110.132:3306)..
Wed Mar 15 13:00:46 2017 - [info] Executed CHANGE MASTER.
Wed Mar 15 13:00:47 2017 - [info] Slave started.
Wed Mar 15 13:00:47 2017 - [info] All new slave servers switched successfully.
Wed Mar 15 13:00:47 2017 - [info]
Wed Mar 15 13:00:47 2017 - [info] * Phase 5: New master cleanup phase..
Wed Mar 15 13:00:47 2017 - [info]
Wed Mar 15 13:00:47 2017 - [info] mysql2: Resetting slave info succeeded.
Wed Mar 15 13:00:47 2017 - [info] Switching master to mysql2(192.168.110.132:3306) completed successfully.注：这里的手工online_change采用--interactive=1的参数，使用交互的方式进行online切换，如果嫌麻烦，也可以设置该参数为0，采用非交互式方式进行online切换。
免责声明：本站发布的内容（图片、视频和文字）以原创、转载和分享为主，文章观点不代表本网站立场，如果涉及侵权请联系站长邮箱：is@yisu.com进行举报，并提供相关证据，一经查实，将立刻删除涉嫌侵权内容。
