一、安装
nagios下载http://download.chinaunix.net/download.php?id=25308&ResourceID=7183
tar fvxz nagios-3.2.0.tar.gz
cd nagios-3.2.0
注：默认使用nagios用户，如果使用别的用户，必须在这里指定
useradd nagios
make all
make install
makeinstall-init
make install-comandmode
makeinstall-config
makeinstall-webconf
vim /etc/httpd/conf/httpd.conf
User nagios
Group nagios
service httpd restart
由于nagios的web控制台必须使用用户验证登陆，所以
htpasswd -c /usr/local/nagios/etc/htpasswd.users nagios
以后再添加用户就不用加-c了
vim /usr/local/nagios/etc/cgi.cfg
在所有的nagiosadmin后面添加nagios
service nagios start
访问：http://localhost/nagios
但此时的nagios监控到的localhost居然是down状态
原因是nagios是通过/usr/local/nagios/libexec下的各种插件来获取主机信息的，而此时此路径下没有安装任何的插件
tar fvxz /tmp/nagios-plugins-1.4.13.tar
cd nagios-plugins-1.4.13
./configure--prefix=/usr/local/nagios/
make
make install
再访问：http://localhost/nagios就会发现localhost是up状态了
二、配置
/usr/local/nagios/etc/nagios.cfg是nagios的主配置文件，通过配置此文件指定各个单独配置文件的路径使得其生效
cfg_file=/usr/local/nagios//etc/objects/commands.cfg(用什么监控？)
cfg_file=/usr/local/nagios//etc/objects/contacts.cfg（有问题联系谁？）
cfg_file=/usr/local/nagios//etc/objects/timeperiods.cfg（什么时间监控？默认即可）
cfg_file=/usr/local/nagios//etc/objects/localhost.cfg（监控谁？包括主机和服务两种）
为了方便管理，我们需要在此文件中为每一个被监控的主机单独指定一个配置文件
cfg_file=/usr/local/nagios//etc/objects/10.8.8.140.cfg
cfg_file=/usr/local/nagios//etc/objects/10.8.8.142.cfg
注：关于10.8.8.140.cfg的书写，请参考附件中的脚本
注：commands.cfg文件中
USER1代表/usr/local/nagios/libexec
$HOSTADDRESS$是系统自带的变量，自动调用localhost.cfg文件中定义的主机define host区域中的 address
$ARG1$是用户自定义的变量，需要在localhost.cfg文件中的check_command后添加!变量值
localhost.cfg中的check_command调用的就是commands.cfg中的command_name。command_name调用/usr/local/nagios/libexec中的check_*
但是，此时的nagios还只能监控本机，不能够监控远程主机。
如果要监控远程主机，需要配合使用nrpe。
原理：nagios服务端通过check_nrpe -H 被监控的IP -c "command"把"command"命令传送给被监控端也就是nrpe服务端，nrpe服务端接收到命令后查找主配置文件nrpe.cfg中command["command"]匹配"command"，然后去执行对应的本地插件，把执行结果返回给 nagios服务端
注：nrpr的服务端是安装在被监控主机的，可以理解为nrpe是一个***程序
被监控端安装nrpe
tar fvxz nrpe-2.12.tar.gz
cd nrpe-2.12
./configure --prefix=/usr/local/nagios2 --with-nrpe-user=apache --with-nrpe-group=apache --with-nagios-user=apache --with-nagios-group=apache
make all
make install-daemon
make install-daemon-config
make install-xinetd
make all
echo "nrpe 5666/tcp" >> /etc/services
tar fvxz /home/yuchunyun/libexec.tgz -C /usr/local/nagios（把nagios服务端的插件拷贝过来）
注：nrpe服务有两种启动方式。1:依赖于xinetd服务。2:单独配置文件方式启动。
方式1：请确保xinetd服务已安装
sed -i s/127.0.0.1/10.8.8.141/g /etc/xinetd.d/nrpe
/etc/init.d/xinetd restart
netstat -nutlp | grep xinetd 会发现nrpe开启的的默认5666端口是以xinetd核心守护进程方式启动
方式2：
/usr/local/nagios/bin/nrpe -c /usr/local/nagios/etc/nrpe.cfg -d
ps -ef | grep nrpe
会发现nrpe是一个单独的进程
日志
tail -f /usr/local/nagios/var/nagios.log
检查错误
/usr/local/nagios/bin/nagios -v/usr/local/nagios/etc/nagios.cfg
Nagios的check_*插件是用过返回值来判断的
0 成功 1 警告 2 严重错误 3 未知
三、自动化添加被监控主机
先执行host.sh
#!/bin/bash
#作者：yuchunyun
#时间：2014/03/14
#用途：此脚本用于监控主机nagios添加被监控端的主机定义
#用法：使用此脚本之前，请确保被监控端已安装nrpe服务，且本机具备连接其NRPE的权限
cfg_path=/usr/local/nagios//etc/objects
nagios_cfg=/usr/local/nagios/etc/nagios.cfg
read -p "please input the hostname(like 10.8.8.141):" hostname
read -p "please input the alise(like 141):" alise
read -p "please input the ipaddress(like 10.8.8.141):" ip
host=`sed -n /$hostname/p $nagios_cfg`
if [ "$host" = "" ];then
echo "cfg_file=$cfg_path/$hostname.cfg" >> $nagios_cfg
echo "define host {
host_name $hostname
alias $alise
address $ip
check_command check-host-alive
notification_options d,u,r
check_interval 1
max_check_attempts 2
contact_groups admins
notification_interval 10
notification_period 24x7
}" > $cfg_path/$hostname.cfg
echo "#############################"
echo "the host:$hostname had add ok"
echo "#############################"
else
echo "the host:$hostname had already existed!!!"
fi再执行service.sh
#!/bin/bash
#作者：yuchunyun
#时间：2014/03/14
#用途：此脚本用于监控主机nagios配置被监控端上的服务监控
#用法：使用此脚本之前请确保已用host.sh脚本定义了该被监控主机。由于监控插件有限，所以只能提供下面列出的监控模板！
cfg_path=/usr/local/nagios/etc/objects
nagios_cfg=/usr/local/nagios/etc/nagios.cfg
nagios_bin=/usr/local/nagios/bin/nagios
read -p "please input the hostname you has been added:" hostname
host=`sed -n /$hostname/p $nagios_cfg`
if [ "$host" = "" ];then
echo "the host:$hostname is undefind!!! "
else
for ((i=0;i<10;i++));
do
echo "please choose some services to monitor"
echo "###Example###
ID SERVICE COMMAND
1 Total User------>check_users;#监控系统登录人数
2 System Load----->check_load;#监控系统负载
3 Total Proces---->check_total_procs;#监控系统进程数
4 Disk------------>check_disk;#监控磁盘使用情况
5 Memory---------->check_free_memory;#监控内存使用情况
6 Contect--------->check_contect_est;#监控活动的网络连接数
7 Httpd process--->check_httpd_proces;#监监控apache进程数
8 Nginx process--->check_nginx_proces;#监控nginx进程数
9 Php process---->check_php_proces;#监控php进程数
10 Mysql process--->check_mysql_proces;#监控Mysql进程数
11 Java process---->check_java_proces;#监控Java进程数
12 quit"
echo -n "please inpout the ID you want check(1-10):"
read id
if [ $id -eq 1 ];then
echo "define service {
host_name $hostname
service_description Total User
check_period 24x7
normal_check_interval 2
retry_check_interval 1
max_check_attempts 5
notification_period 24x7
notification_options w,u,c,r
check_command check_nrpe!check_users
}" >> $cfg_path/$hostname.cfg
echo "Total User had monitored OK!"
elif [ $id -eq 2 ];then
echo "define service {
host_name $hostname
service_description System Load
check_period 24x7
normal_check_interval 2
retry_check_interval 1
max_check_attempts 5
notification_period 24x7
notification_options w,u,c,r
check_command check_nrpe!check_load
}" >> $cfg_path/$hostname.cfg
echo "System Load had monitored OK!"
elif [ $id -eq 3 ];then
echo "define service {
host_name $hostname
service_description Total Proces
check_period 24x7
normal_check_interval 2
retry_check_interval 1
max_check_attempts 5
notification_period 24x7
notification_options w,u,c,r
check_command check_nrpe!check_total_procs
}" >> $cfg_path/$hostname.cfg
echo "Total Proces had monitored OK!"
elif [ $id -eq 4 ];then
echo "define service {
host_name $hostname
service_description Disk
check_period 24x7
normal_check_interval 2
retry_check_interval 1
max_check_attempts 5
notification_period 24x7
notification_options w,u,c,r
check_command check_nrpe!check_disk
}" >> $cfg_path/$hostname.cfg
echo "Disk had monitored OK!"
elif [ $id -eq 5 ];then
echo "define service {
host_name $hostname
service_description Memory
check_period 24x7
normal_check_interval 2
retry_check_interval 1
max_check_attempts 5
notification_period 24x7
notification_options w,u,c,r
check_command check_nrpe!check_free_memory
}" >> $cfg_path/$hostname.cfg
echo "Memory had monitored OK!"
elif [ $id -eq 6 ];then
echo "define service {
host_name $hostname
service_description Contect
check_period 24x7
normal_check_interval 2
retry_check_interval 1
max_check_attempts 5
notification_period 24x7
notification_options w,u,c,r
check_command check_nrpe!check_contect
}" >> $cfg_path/$hostname.cfg
echo "Contect had monitored OK!"
elif [ $id -eq 7 ];then
echo "define service {
host_name $hostname
service_description Httpd process
check_period 24x7
normal_check_interval 2
retry_check_interval 1
max_check_attempts 5
notification_period 24x7
notification_options w,u,c,r
check_command check_nrpe!check_httpd_proces
}" >> $cfg_path/$hostname.cfg
echo "Httpd process had monitored OK!"
elif [ $id -eq 8 ];then
echo "define service {
host_name $hostname
service_description Nginx process
check_period 24x7
normal_check_interval 2
retry_check_interval 1
max_check_attempts 5
notification_period 24x7
notification_options w,u,c,r
check_command check_nrpe!check_nginx_proces
}" >> $cfg_path/$hostname.cfg
echo "Nginx process had monitored OK!"
elif [ $id -eq 9 ];then
echo "define service {
host_name $hostname
service_description Php process
check_period 24x7
normal_check_interval 2
retry_check_interval 1
max_check_attempts 5
notification_period 24x7
notification_options w,u,c,r
check_command check_nrpe!check_php_proces
}" >> $cfg_path/$hostname.cfg
echo "Php process had monitored OK!"
elif [ $id -eq 10 ];then
echo "define service {
host_name $hostname
service_description Mysql process
check_period 24x7
normal_check_interval 2
retry_check_interval 1
max_check_attempts 5
notification_period 24x7
notification_options w,u,c,r
check_command check_nrpe!check_mysql_proces
}" >> $cfg_path/$hostname.cfg
echo "Mysql process had monitored OK!"
elif [ $id -eq 11 ];then
echo "define service {
host_name $hostname
service_description Java process
check_period 24x7
normal_check_interval 2
retry_check_interval 1
max_check_attempts 5
notification_period 24x7
notification_options w,u,c,r
check_command check_nrpe!check_java_proces
}" >> $cfg_path/$hostname.cfg
echo "Java process had monitored OK!"
elif [ $id -eq 12 ];then
break
else
echo "your input values is invalid"
fi
done
fi
$nagios_bin -v $nagios_cfg #检测配置文件有没有语法错误四、常见错误
解决：原因是命令执行的超时时间有限制
1.vi commands.cfg ---> command_line /usr/local/nagios/libexec/check_nrpe -H $HOSTADDRESS$ -c $ARG1$ -t 60 (默认命令后面加：-t 60)
2.vi nrpe.cfg ---> command_timeout=60免责声明：本站发布的内容（图片、视频和文字）以原创、转载和分享为主，文章观点不代表本网站立场，如果涉及侵权请联系站长邮箱：is@yisu.com进行举报，并提供相关证据，一经查实，将立刻删除涉嫌侵权内容。
