温馨提示×

温馨提示×

您好,登录后才能下订单哦!

密码登录×
登录注册×
其他方式登录
点击 登录注册 即表示同意《亿速云用户服务条款》

关于LVS负载均衡群集的案例简介

发布时间:2020-04-20 15:38:34 来源:亿速云 阅读:274 作者:三月 栏目:系统运维

下文给大家带来关于LVS负载均衡群集的案例简介,希望能够给大家在实际运用中带来一定的帮助,负载均衡涉及的东西比较多,理论也不多,网上有很多书籍,今天我们就用亿速云在行业内累计的经验做一个解答。

一、案例简介

1、案例环境

关于LVS负载均衡群集的案例简介

2、实验结果

  • 使用NAT模式的群集技术,LVS负载调度器是所有节点访问Internet的网关云服务器,其192.168.200.10作为整个群集的VIP地址。

  • 使用轮询(rr)的调度算法。

  • web1和web2先搭建web服务,分别准备不同的网页文件,供客户端访问,以此来确定client访问LVS服务器的192.168.200.10,可以访问到两台web服务器。

  • 待client测试成功后,web1和web2便可以挂载NFS服务器提供的共享目录,以此来为client提供相同的网页文件。

二、开始搭建复制均衡群集

1、部署Web1服务器:

[root@centos01 ~]# yum -y install httpd  <!--安装httpd服务-->
[root@centos01 ~]# echo "www.benet.com" > 
/var/www/html/index.html   <!--创建网站主页测试页-->
[root@centos01 ~]# systemctl start httpd   <!--启动httpd服务-->
[root@centos01 ~]# systemctl enable httpd  <!--设置开机自动启动-->
[root@centos01 ~]# vim /etc/sysconfig/network-scripts/ifcfg-ens32   
      <!--编辑网卡配置文件-->
GATEWAY=192.168.100.40   <!--添加网关-->
[root@centos01 ~]# systemctl restart network<!--重启网卡服务-->

2、部署Web2服务器:

[root@centos02 ~]# yum -y install httpd    <!--安装httpd服务-->
[root@centos02 ~]# echo "www.accp.com" > 
/var/www/html/index.html    <!--创建网站主页测试页-->
[root@centos02 ~]# systemctl start httpd    <!--启动httpd服务-->
[root@centos02 ~]# systemctl enable httpd <!--设置开机自动启动-->
[root@centos02 ~]# vim /etc/sysconfig/network-scripts/ifcfg-ens32    
          <!--编辑网卡配置文件-->
GATEWAY=192.168.100.40   <!--添加网关-->
[root@centos02 ~]# systemctl restart network <!--重启网卡服务-->

3、部署网关/LVS服务器:

[root@centos04 ~]# cp /etc/sysconfig/network-scripts/ifcfg-ens32 
/etc/sysconfig/network-scripts/ifcfg-ens34  
<!--复制网卡配置文件-->
[root@centos04 ~]# vim /etc/sysconfig/network-scripts/ifcfg-ens34   
        <!--编辑ens34网卡配置文件-->
TYPE=Ethernet
PROXY_METHOD=none
BROWSER_ONLY=no
BOOTPROTO=static
DEFROUTE=yes
NAME=ens34      <!--修改名字-->
DEVICE=ens34   <!--修改名字-->
ONBOOT=yes
IPADDR=192.168.200.10   <!--配置IP地址-->
NATEMASK=255.255.255.0
[root@centos04 ~]# systemctl restart network <!--重启网卡服务-->
[root@centos04 ~]# vim /etc/sysctl.conf   <!--开启路由转发功能-->
net.ipv4.ip_forward = 1

[root@centos04 ~]# sysctl -p   <!--验证-->
net.ipv4.ip_forward = 1
[root@centos04 ~]# modprobe ip_vs   <!--加载ip_vs模块-->
[root@centos04 ~]# yum -y install ipvsadm<!--安装ipvsadm软件包-->
[root@centos04 ~]# ipvsadm -C   <!--清空ipvsadm规则-->
[root@centos04 ~]# ipvsadm -A -t 192.168.200.10:80 -s rr  
             <!--创建虚拟服务器,群集的VIP地址为192.168.200.10-->
[root@centos04 ~]# ipvsadm -a -t 192.168.200.10:80 -r 
192.168.100.10:80 -m -w 1   <!--添加服务器节点-->
[root@centos04 ~]# ipvsadm -a -t 192.168.200.10:80 -r 
192.168.100.20:80 -m -w 1   <!--添加服务器节点-->
[root@centos04 ~]# ipvsadm-save   <!--保存策略-->
-A -t centos04:http -s rr
-a -t centos04:http -r 192.168.100.10:http -m -w 1
-a -t centos04:http -r 192.168.100.20:http -m -w 1
[root@centos04 ~]# ipvsadm-save > 
/etc/sysconfig/ipvsadm.bak<!--导出策略 备份策略-->
[root@centos04 ~]# cat /etc/sysconfig/ipvsadm.bak <!--查看备份的策略-->
-A -t centos04:http -s rr
-a -t centos04:http -r 192.168.100.10:http -m -w 1
-a -t centos04:http -r 192.168.100.20:http -m -w 1

4、配置客户端

1)客户端配置IP地址
关于LVS负载均衡群集的案例简介

2)测试LVS负载均衡服务器是否工作正常(多次访问192.168.200.10,可以得到两个不同的页面):
关于LVS负载均衡群集的案例简介

关于LVS负载均衡群集的案例简介

5、配置NFS共享存储

[root@centos03 ~]# yum -y install nfs-utils rpcbind <!--安装NFS相关软件包-->
[root@centos03 ~]# systemctl enable nfs <!--设置为开机自动启动-->
[root@centos03 ~]# systemctl enable rpcbind <!--设置为开机自动启动-->
[root@centos03 ~]# mkdir -p /opt/wwwroot   <!--创建共享目录-->
[root@centos03 ~]# echo "www.wangyi.com" > 
/opt/wwwroot/index.html   <!--新建网站主页,写入内容-->
[root@centos03 ~]# vim /etc/exports   <!--设置共享目录-->
/opt/wwwroot    192.168.100.0/24(rw,sync,no_root_squash)  <!--添加此行-->
[root@centos03 ~]# systemctl restart rpcbind  <!--重启服务-->
[root@centos03 ~]# systemctl restart nfs   <!--重启服务-->
[root@centos03 ~]# showmount -e   <!--查看共享的目录-->
Export list for centos03:
/opt/wwwroot 192.168.100.0/24
1)Web服务器1挂载共享目录
[root@centos01 ~]# yum -y install rpcbind nfs-utils<!--安装相关软件包-->
[root@centos01 ~]# systemctl enable rpcbind
                       <!--设置服务开机自动启动-->
[root@centos01 ~]# systemctl start rpcbind <!--启动服务-->
[root@centos01 ~]# showmount -e 192.168.100.30  
                           <!--查询NFS服务器共享的目录-->
Export list for 192.168.100.30:
/opt/wwwroot 192.168.100.0/24
[root@centos01 ~]# mount 192.168.100.30:/opt/wwwroot 
/var/www/html/   <!--挂载共享目录-->
[root@centos01 ~]# df -hT /var/www/html/ <!--查看是否挂载成功-->
文件系统                    类型  容量  已用  可用 已用% 挂载点
192.168.100.30:/opt/wwwroot nfs4   76G  3.7G   73G    5% /var/www/html
[root@centos01 ~]# vim /etc/fstab   <!--设置自动挂载-->
192.168.100.30:/opt/wwwroot     /var/www/html                     nfs     defaults,_netdev 0 0
2)Web服务器2挂载共享目录
[root@centos02 ~]# yum -y install rpcbind nfs-utils <!--安装相关软件包-->
[root@centos02 ~]# systemctl enable rpcbind  
                                     <!--设置服务开机自动启动-->
[root@centos02 ~]# systemctl start rpcbind    <!--启动服务-->
[root@centos02 ~]# showmount -e 192.168.100.30   
                             <!--查询NFS服务器共享的目录-->
Export list for 192.168.100.30:
/opt/wwwroot 192.168.100.0/24
[root@centos02 ~]# mount 192.168.100.30:/opt/wwwroot 
/var/www/html/     <!--挂载共享目录-->
[root@centos02 ~]# df -hT /var/www/html/ <!--查看是否挂载成功-->
文件系统                    类型  容量  已用  可用 已用% 挂载点
192.168.100.30:/opt/wwwroot nfs4   76G  3.7G   73G    5% /var/www/html
[root@centos02 ~]# vim /etc/fstab   <!--设置自动挂载-->
192.168.100.30:/opt/wwwroot     /var/www/html                     nfs     defaults,_netdev 0 0

6、客户端访问

关于LVS负载均衡群集的案例简介
至此,不管怎样刷新访问,都将是看到同一个网页。最终的LVS负载均衡效果也就实现了。

当LVS服务器重启后,LVS规则将会丢失,这就用到了备份,需要注意的是,备份时的主机名和恢复时的主机名必须一致,并且需要注意网卡优先的问题,否则在恢复后,会发现VIP(群集的虚拟IP)变成了LVS服务器的另一个IP地址

[root@centos04 ~]# ipvsadm -ln  <!--重启后查看策略-->
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port           Forward Weight ActiveConn InActConn

[root@centos04 ~]# ipvsadm-restore < 
/etc/sysconfig/ipvsadm.bak    <!--恢复策略-->
[root@centos04 ~]# ipvsadm -ln      <!--查看策略是否恢复-->
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
TCP  192.168.100.40:80 rr
  -> 192.168.100.10:80            Masq    1      0          0         
  -> 192.168.100.20:80            Masq    1      0          0   

看了以上关于关于LVS负载均衡群集的案例简介,如果大家还有什么地方需要了解的可以在亿速云行业资讯里查找自己感兴趣的或者找我们的专业技术工程师解答的,亿速云技术工程师在行业内拥有十几年的经验了。

 

向AI问一下细节

免责声明:本站发布的内容(图片、视频和文字)以原创、转载和分享为主,文章观点不代表本网站立场,如果涉及侵权请联系站长邮箱:is@yisu.com进行举报,并提供相关证据,一经查实,将立刻删除涉嫌侵权内容。

AI