温馨提示×

温馨提示×

您好,登录后才能下订单哦!

密码登录×
登录注册×
其他方式登录
点击 登录注册 即表示同意《亿速云用户服务条款》

Linux操作系统中分区格式转换LVM格式及多磁盘创建PV、VG、LV

发布时间:2020-08-09 01:55:20 来源:ITPUB博客 阅读:589 作者:Davis_itpub 栏目:建站服务器

在工作中,经常遇到两种情况:1、系统盘与数据盘在同一个Raid组; 2、系统盘与数据盘分离(不同Raid组); 

有时可能因公司要求按某基本安装OS,则需要对已安装好的OS中利用空余空间或增加空余空间使用,此时

将涉及分区格式转换,当前以转换为:LVM格式为例:

[root@ihmp ~]# fdisk /dev/sdb   ——有时可能是同Raid组,一块几个T的硬盘

Welcome to fdisk (util-linux 2.23.2).

Changes will remain in memory only, until you decide to write them.

Be careful before using the write command.

Device does not contain a recognized partition table

Building a new DOS disklabel with disk identifier 0x6e84979f.

Command (m for help): n

Partition type:

   p   primary (0 primary, 0 extended, 4 free)

   e   extended

Select (default p): p

Partition number (1-4, default 1): 默认回车    

First sector (2048-104857599, default 2048): 默认回车

Using default value 2048

Last sector, +sectors or +size{K,M,G} (2048-104857599, default 104857599): +25600M ——指定分区大小

Partition 1 of type Linux and of size 25 GiB is set

Command (m for help): t     ——列出所需要转换分区

Selected partition 1

Hex code (type L to list all codes): ——查看需要转换的分区序号

 0  Empty           24  NEC DOS         81  Minix / old Lin bf  Solaris        

 1  FAT12           27  Hidden NTFS Win 82  Linux swap / So c1  DRDOS/sec (FAT-

 2  XENIX root      39  Plan 9          83  Linux           c4  DRDOS/sec (FAT-

 3  XENIX usr       3c  PartitionMagic  84  OS/2 hidden C:  c6  DRDOS/sec (FAT-

 4  FAT16 <32M      40  Venix 80286     85  Linux extended  c7  Syrinx         

 5  Extended        41  PPC PReP Boot   86  NTFS volume set da  Non-FS data    

 6  FAT16           42  SFS             87  NTFS volume set db  CP/M / CTOS / .

 7  HPFS/NTFS/exFAT 4d  QNX4.x          88  Linux plaintext de  Dell Utility   

 8  AIX             4e  QNX4.x 2nd part 8e  Linux LVM       df  BootIt            

 9  AIX bootable    4f  QNX4.x 3rd part 93  Amoeba          e1  DOS access     

 a  OS/2 Boot Manag 50  OnTrack DM      94  Amoeba BBT      e3  DOS R/O        

 b  W95 FAT32       51  OnTrack DM6 Aux 9f  BSD/OS          e4  SpeedStor      

 c  W95 FAT32 (LBA) 52  CP/M            a0  IBM Thinkpad hi eb  BeOS fs        

 e  W95 FAT16 (LBA) 53  OnTrack DM6 Aux a5  FreeBSD         ee  GPT            

 f  W95 Ext'd (LBA) 54  OnTrackDM6      a6  OpenBSD         ef  EFI (FAT-12/16/

10  OPUS            55  EZ-Drive        a7  NeXTSTEP        f0  Linux/PA-RISC b

11  Hidden FAT12    56  Golden Bow      a8  Darwin UFS      f1  SpeedStor      

12  Compaq diagnost 5c  Priam Edisk     a9  NetBSD          f4  SpeedStor      

14  Hidden FAT16 <3 61  SpeedStor       ab  Darwin boot     f2  DOS secondary  

16  Hidden FAT16    63  GNU HURD or Sys af  HFS / HFS+      fb  VMware VMFS    

17  Hidden HPFS/NTF 64  Novell Netware  b7  BSDI fs         fc  VMware VMKCORE 

18  AST SmartSleep  65  Novell Netware  b8  BSDI swap       fd  Linux raid auto

1b  Hidden W95 FAT3 70  DiskSecure Mult bb  Boot Wizard hid fe  LANstep        

1c  Hidden W95 FAT3 75  PC/IX           be  Solaris boot    ff  BBT            

1e  Hidden W95 FAT1 80  Old Minix      

Hex code (type L to list all codes): 

Hex code (type L to list all codes): 8e     ——对就分区格式查看8e则我们当前所需要转换的:LVM格式

Changed type of partition 'Linux' to 'Linux LVM'

Command (m for help): ——p(print)查看已转换分区

Disk /dev/sdb: 53.7 GB, 53687091200 bytes, 104857600 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk label type: dos

Disk identifier: 0x6e84979f

   Device Boot      Start         End      Blocks   Id  System

/dev/sdb1            2048    52430847    26214400   8e  Linux LVM

Command (m for help): w    ——保存分区表

The partition table has been altered!

Calling ioctl() to re-read partition table.

Syncing disks.

[root@ihmp ~]# ls -l /dev/sdb1  ——若查看没有对应的分区磁盘存在时可以尝试重启OS,再次查看; 

brw-rw---- 1 root disk 8, 17 Jun 30 21:28 /dev/sdb1

[root@ihmp ~]# 

[root@ihmp ~]#  fdisk /dev/sdb 

Welcome to fdisk (util-linux 2.23.2).

Changes will remain in memory only, until you decide to write them.

Be careful before using the write command.

Command (m for help): n

Partition type:

   p   primary (1 primary, 0 extended, 3 free)

   e   extended

Select (default p): 

Using default response p

Partition number (2-4, default 2): 默认回车    ——若不是默认可以自指定分区号

First sector (52430848-104857599, default 52430848): 默认回车

Using default value 52430848

Last sector, +sectors or +size{K,M,G} (52430848-104857599, default 104857599): 

Using default value 104857599

Partition 2 of type Linux and of size 25 GiB is set

Command (m for help): t

Partition number (1,2, default 2):  默认回车     ——若不是默认可以自指定分区号

Hex code (type L to list all codes): l    ——查看需要转换的分区序号

 0  Empty           24  NEC DOS         81  Minix / old Lin bf  Solaris        

 1  FAT12           27  Hidden NTFS Win 82  Linux swap / So c1  DRDOS/sec (FAT-

 2  XENIX root      39  Plan 9          83  Linux           c4  DRDOS/sec (FAT-

 3  XENIX usr       3c  PartitionMagic  84  OS/2 hidden C:  c6  DRDOS/sec (FAT-

 4  FAT16 <32M      40  Venix 80286     85  Linux extended  c7  Syrinx         

 5  Extended        41  PPC PReP Boot   86  NTFS volume set da  Non-FS data    

 6  FAT16           42  SFS             87  NTFS volume set db  CP/M / CTOS / .

 7  HPFS/NTFS/exFAT 4d  QNX4.x          88  Linux plaintext de  Dell Utility   

 8  AIX             4e  QNX4.x 2nd part 8e  Linux LVM       df  BootIt         

 9  AIX bootable    4f  QNX4.x 3rd part 93  Amoeba          e1  DOS access     

 a  OS/2 Boot Manag 50  OnTrack DM      94  Amoeba BBT      e3  DOS R/O        

 b  W95 FAT32       51  OnTrack DM6 Aux 9f  BSD/OS          e4  SpeedStor      

 c  W95 FAT32 (LBA) 52  CP/M            a0  IBM Thinkpad hi eb  BeOS fs        

 e  W95 FAT16 (LBA) 53  OnTrack DM6 Aux a5  FreeBSD         ee  GPT            

 f  W95 Ext'd (LBA) 54  OnTrackDM6      a6  OpenBSD         ef  EFI (FAT-12/16/

10  OPUS            55  EZ-Drive        a7  NeXTSTEP        f0  Linux/PA-RISC b

11  Hidden FAT12    56  Golden Bow      a8  Darwin UFS      f1  SpeedStor      

12  Compaq diagnost 5c  Priam Edisk     a9  NetBSD          f4  SpeedStor      

14  Hidden FAT16 <3 61  SpeedStor       ab  Darwin boot     f2  DOS secondary  

16  Hidden FAT16    63  GNU HURD or Sys af  HFS / HFS+      fb  VMware VMFS    

17  Hidden HPFS/NTF 64  Novell Netware  b7  BSDI fs         fc  VMware VMKCORE 

18  AST SmartSleep  65  Novell Netware  b8  BSDI swap       fd  Linux raid auto

1b  Hidden W95 FAT3 70  DiskSecure Mult bb  Boot Wizard hid fe  LANstep        

1c  Hidden W95 FAT3 75  PC/IX           be  Solaris boot    ff  BBT            

1e  Hidden W95 FAT1 80  Old Minix      

Hex code (type L to list all codes):     

Hex code (type L to list all codes): 8e

Changed type of partition 'Linux' to 'Linux LVM'

Command (m for help): 

Command (m for help): p

Disk /dev/sdb: 53.7 GB, 53687091200 bytes, 104857600 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk label type: dos

Disk identifier: 0x6e84979f

   Device Boot      Start         End      Blocks   Id  System

/dev/sdb1            2048    52430847    26214400   8e  Linux LVM

/dev/sdb2        52430848   104857599    26213376   8e  Linux LVM

Command (m for help): w

The partition table has been altered!

Calling ioctl() to re-read partition table.

Syncing disks.

[root@ihmp ~]# ls -l /dev/sd*

brw-rw---- 1 root disk 8,  0 Jun 30 21:24 /dev/sda

brw-rw---- 1 root disk 8,  1 Jun 30 21:24 /dev/sda1

brw-rw---- 1 root disk 8,  2 Jun 30 21:24 /dev/sda2

brw-rw---- 1 root disk 8, 16 Jun 30 21:30 /dev/sdb

brw-rw---- 1 root disk 8, 17 Jun 30 21:33 /dev/sdb1

brw-rw---- 1 root disk 8, 18 Jun 30 21:33 /dev/sdb2

[root@ihmp ~]# 

创建PV

[root@ihmp ~]# 

[root@ihmp ~]# pvcreate /dev/sdb[1-2]    ——批量创建PV

  Physical volume "/dev/sdb1" successfully created.

  Physical volume "/dev/sdb2" successfully created.

[root@ihmp ~]# 

[root@ihmp ~]# pvscan     ——查看pv

  PV /dev/sda2   VG vgihmp          lvm2 [<99.00 GiB / 32.00 MiB free]

  PV /dev/sdb2                      lvm2 [<25.00 GiB]

  PV /dev/sdb1                      lvm2 [25.00 GiB]

  Total: 3 [<149.00 GiB] / in use: 1 [<99.00 GiB] / in no VG: 2 [<50.00 GiB]

创建VG

[root@ihmp ~]# vgcreate vgapp /dev/sdb[1-2]     ——多盘VG创建

  Volume group "vgapp" successfully created

[root@ihmp ~]# 

[root@ihmp ~]# vgscan     ——VG查看

  Reading volume groups from cache.

  Found volume group "vgapp" using metadata type lvm2

  Found volume group "vgihmp" using metadata type lvm2

[root@ihmp ~]# 

创建LV

[root@ihmp ~]# lvcreate -l100%FREE -n lvapp vgapp    或lv指定大小创建lvcreate -L 99g vg_racdb_app -n lv_racapp

  Logical volume "lvapp" created.

[root@ihmp ~]# 

[root@ihmp ~]# lvscan

  ACTIVE            '/dev/vgapp/lvapp' [49.99 GiB] inherit

  ACTIVE            '/dev/vgihmp/lvswap' [8.00 GiB] inherit

  ACTIVE            '/dev/vgihmp/lvroot' [60.96 GiB] inherit

  ACTIVE            '/dev/vgihmp/lvihmp' [10.00 GiB] inherit

  ACTIVE            '/dev/vgihmp/lvmysqldb' [20.00 GiB] inherit

[root@ihmp ~]# 

创建挂接点

[root@ihmp ~]# mkdir -p /app

[root@ihmp ~]# 

格式化分区

[root@ihmp ~]# mkfs.xfs /dev/mapper/vgapp-lvapp 

meta-data=/dev/mapper/vgapp-lvapp isize=512    agcount=4, agsize=3276288 blks

         =                       sectsz=512   attr=2, projid32bit=1

         =                       crc=1        finobt=0, sparse=0

data     =                       bsize=4096   blocks=13105152, imaxpct=25

         =                       sunit=0      swidth=0 blks

naming   =version 2              bsize=4096   ascii-ci=0 ftype=1

log      =internal log           bsize=4096   blocks=6399, version=2

         =                       sectsz=512   sunit=0 blks, lazy-count=1

realtime =none                   extsz=4096   blocks=0, rtextents=0

[root@ihmp ~]# 

设置挂接点开启启动

[root@ihmp ~]# vi /etc/fstab 

#

# /etc/fstab

# Created by anaconda on Sat Sep  7 09:09:56 2019

#

# Accessible filesystems, by reference, are maintained under '/dev/disk'

# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info

#

/dev/mapper/vgihmp-lvroot /                       xfs     defaults        0 0

UUID=034666be-8906-4c9a-8ab7-9d0bae68494b /boot                   xfs     defaults        0 0

/dev/mapper/vgihmp-lvihmp /ihmp                   xfs     defaults        0 0

/dev/mapper/vgihmp-lvmysqldb /mysqldb                xfs     defaults        0 0

/dev/mapper/vgihmp-lvswap swap                    swap    defaults        0 0

/dev/mapper/vgapp-lvapp /app                xfs     defaults        0 0   

#0 0表示OS启动时检查分区;1 1则OS启动时永不检查,根据自己需求选择

~

"/etc/fstab" 14L, 700C written

[root@ihmp ~]# 

测试所配置挂接点是否正常

[root@ihmp ~]# mount -a

[root@ihmp ~]# 

[root@ihmp ~]# df -h   

Filesystem                    Size  Used Avail Use% Mounted on

/dev/mapper/vgihmp-lvroot      61G  9.5G   52G  16% /

devtmpfs                      979M     0  979M   0% /dev

tmpfs                         991M     0  991M   0% /dev/shm

tmpfs                         991M  9.6M  981M   1% /run

tmpfs                         991M     0  991M   0% /sys/fs/cgroup

/dev/sda1                    1014M  133M  882M  14% /boot

/dev/mapper/vgihmp-lvmysqldb   20G  363M   20G   2% /mysqldb

/dev/mapper/vgihmp-lvihmp      10G  630M  9.4G   7% /ihmp

tmpfs                         199M     0  199M   0% /run/user/0

/dev/mapper/vgapp-lvapp        50G   33M   50G   1% /app

[root@ihmp ~]# 

向AI问一下细节

免责声明:本站发布的内容(图片、视频和文字)以原创、转载和分享为主,文章观点不代表本网站立场,如果涉及侵权请联系站长邮箱:is@yisu.com进行举报,并提供相关证据,一经查实,将立刻删除涉嫌侵权内容。

AI