温馨提示×

温馨提示×

您好,登录后才能下订单哦!

密码登录×
登录注册×
其他方式登录
点击 登录注册 即表示同意《亿速云用户服务条款》

Centos+PHP模块+exif扩展 (第三方模块)

发布时间:2020-07-20 15:29:52 来源:网络 阅读:4583 作者:邱月涛 栏目:web开发

今日应开发需求,想要显示图片的属性信息,于是度娘就告知exif模块可以实现,操作步骤与问题总结吐下;

php安装扩展的几种方法

注意

与Apache+PHP或者Nginx+PHP的运行模式不同,WorkerMan是基于PHP命令行 PHP CLI 运行的,使用的是不同的PHP可执行程序,使用的php.ini文件也可能不同。所以在网页中打印phpinfo()看到安装了某个扩展,不代表命令行的PHP CLI也安装了对应的扩展。

如何确定PHP CLI安装了哪些扩展

运行 php -m 会列出命令行 PHP CLI 已经安装的扩展,结果类似如下:

~# php -m
[PHP Modules]
libevent
posix
pcntl
...

如何确定PHP CLI 的php.ini文件的位置

当我们安装扩展时,可能需要手动配置php.ini文件,把扩展加进去,所以要确认PHP CLI的php.ini文件的位置。可以运行php --ini查找PHP CLI的ini文件位置,结果类似如下(各个系统显示结果会有差异):

~# php --ini
Configuration File (php.ini) Path: /etc/php5/cli
Loaded Configuration File:         /etc/php5/cli/php.ini
Scan for additional .ini files in: /etc/php5/cli/conf.d
Additional .ini files parsed:      /etc/php5/cli/conf.d/apc.ini,
/etc/php5/cli/conf.d/libevent.ini,
/etc/php5/cli/conf.d/memcached.ini,
/etc/php5/cli/conf.d/mysql.ini,
/etc/php5/cli/conf.d/pdo.ini,
/etc/php5/cli/conf.d/pdo_mysql.ini
...

给PHP CLI安装扩展(安装memcached扩展为例)

方法一、使用apt或者yum命令安装

如果PHP是通过 apt 或者 yum 命令安装的,则扩展也可以通过 apt 或者 yum 安装

debian/ubuntu等系统apt安装PHP扩展方法(非root用户需要加sudo命令)

1、利用apt-cache search查找扩展包

~# apt-cache search memcached php
php-apc - APC (Alternative PHP Cache) module for PHP 5
php5-memcached - memcached module for php5

2、使用apt-get install安装扩展包

~# apt-get install -y php5-memcached
Reading package lists... Done
Reading state information... Done
...

centos等系统yum安装PHP扩展方法

1、利用yum search查找扩展包

~# yum search memcached php
php-pecl-memcached - memcached module for php5

2、使用yum install安装扩展包

~# yum install -y php-pecl-memcached
Reading package lists... Done
Reading state information... Done
...

说明:

使用apt或者yum安装PHP扩展会自动配置php.ini文件,安装完直接可用,十分方便。缺点是有些扩展在apt或者yum中没有对应的扩展安装包。

方法二、使用pecl安装

使用pecl install命令安装扩展

1、pecl install安装

~# pecl install memcached
downloading memcached-2.2.0.tgz ...
Starting to download memcached-2.2.0.tgz (70,449 bytes)
....

方法三、使用phpzip安装模块

一、环境介绍

[root@ghzz ~]# cat /etc/redhat-release 
CentOS release 6.5 (Final)
You have new mail in /var/spool/mail/root
[root@ghzz ~]# php -v
Zend Guard Loader requires Zend Engine API version 220121212.
The Zend Engine API version 220131226 which is installed, is newer.
Contact Zend Technologies at http://www.zend.com/ for a later version of Zend Guard Loader.
PHP 5.6.14 (cli) (built: Jul  7 2016 12:43:11) 
Copyright (c) 1997-2015 The PHP Group
Zend Engine v2.6.0, Copyright (c) 1998-2015 Zend Technologies
    with Zend OPcache v7.0.6-dev, Copyright (c) 1999-2015, by Zend Technologies

二、查找模块

方法一:去php安装路径下ext目录下都是模块

cd /root/software/php-5.6.14/ext/exif

如果找不到 find ./ -type d -name "php*" 去查找

###这个模块,应该是php安装包内自带的,但是./configure编译安装的时候没有加载的包

方法二:php官网 

PHP官网地址:http://pecl.php.net/packages.php


三、编译安装 (加载模块)

1)进入php存储模块目录

[root@ghzz lsolesen-pel-56d1b7f]# cd /root/software/php-5.6.14/ext/exif  ##测试环境
##如果找不到 find ./ -type f -name "php-*" 去查找
[root@ghzz exif]# ll
总用量 196
-rw-r--r-- 1 1000 1000    333 9月  30 2015 config.m4
-rw-r--r-- 1 1000 1000    308 9月  30 2015 config.w32
-rw-r--r-- 1 1000 1000     36 9月  30 2015 CREDITS
-rw-r--r-- 1 1000 1000    496 9月  30 2015 example.php
-rw-r--r-- 1 1000 1000 145331 9月  30 2015 exif.c
-rw-r--r-- 1 1000 1000   4933 9月  30 2015 exif.dsp
-rw-r--r-- 1 1000 1000   1953 9月  30 2015 package.xml
-rw-r--r-- 1 1000 1000   1463 9月  30 2015 php_exif.h
-rw-r--r-- 1 1000 1000     29 9月  30 2015 test.php
drwxr-xr-x 2 1000 1000   4096 9月  30 2015 tests
-rw-r--r-- 1 1000 1000  11232 9月  30 2015 test.txt

2)使用phpize添加php动态模块

作用:使用phpize生成

[root@ghzz exif]# /usr/local/php/bin/phpize
Configuring for:
PHP Api Version:         20131106
Zend Module Api No:      20131226
Zend Extension Api No:   220131226
[root@ghzz exif]# ./configure -with-php-config=/usr/local/php/bin/php-config
checking for grep that handles long lines and -e... /bin/grep
#。。。省略若干字段
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no

creating libtool
appending configuration tag "CXX" to libtool
configure: creating ./config.status
config.status: creating config.h
[root@ghzz exif]# make && make install
/bin/sh /root/software/php-5.6.14/ext/exif/libtool --mode=compile cc  -I. -I/root/software/php-5.6.14/ext/exif -DPHP_ATOM_INC -I/root/software/php-5.6.14/ext/exif/include -I/root/software/php-5.6.14/ext/exif/main -I/root/software/php-5.6.14/ext/exif -I/usr/local/php/include/php -I/usr/local/php/include/php/main -I/usr/local/php/include/php/TSRM -I/usr/local/php/include/php/Zend -I/usr/local/php/include/php/ext -I/usr/local/php/include/php/ext/date/lib  -DHAVE_CONFIG_H  -g -O2   -c /root/software/php-5.6.14/ext/exif/exif.c -o exif.lo 
mkdir .libs
 cc -I. -I/root/software/php-5.6.14/ext/exif -DPHP_ATOM_INC -I/root/software/php-5.6.14/ext/exif/include -I/root/software/php-5.6.14/ext/exif/main -I/root/software/php-5.6.14/ext/exif -I/usr/local/php/include/php -I/usr/local/php/include/php/main -I/usr/local/php/include/php/TSRM -I/usr/local/php/include/php/Zend -I/usr/local/php/include/php/ext -I/usr/local/php/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/software/php-5.6.14/ext/exif/exif.c  -fPIC -DPIC -o .libs/exif.o
/bin/sh /root/software/php-5.6.14/ext/exif/libtool --mode=link cc -DPHP_ATOM_INC -I/root/software/php-5.6.14/ext/exif/include -I/root/software/php-5.6.14/ext/exif/main -I/root/software/php-5.6.14/ext/exif -I/usr/local/php/include/php -I/usr/local/php/include/php/main -I/usr/local/php/include/php/TSRM -I/usr/local/php/include/php/Zend -I/usr/local/php/include/php/ext -I/usr/local/php/include/php/ext/date/lib  -DHAVE_CONFIG_H  -g -O2   -o exif.la -export-dynamic -avoid-version -prefer-pic -module -rpath /root/software/php-5.6.14/ext/exif/modules  exif.lo 
cc -shared  .libs/exif.o   -Wl,-soname -Wl,exif.so -o .libs/exif.so
creating exif.la
(cd .libs && rm -f exif.la && ln -s ../exif.la exif.la)
/bin/sh /root/software/php-5.6.14/ext/exif/libtool --mode=install cp ./exif.la /root/software/php-5.6.14/ext/exif/modules
cp ./.libs/exif.so /root/software/php-5.6.14/ext/exif/modules/exif.so
cp ./.libs/exif.lai /root/software/php-5.6.14/ext/exif/modules/exif.la
PATH="$PATH:/sbin" ldconfig -n /root/software/php-5.6.14/ext/exif/modules
----------------------------------------------------------------------
Libraries have been installed in:
   /root/software/php-5.6.14/ext/exif/modules

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the `LD_RUN_PATH' environment variable
     during linking
   - use the `-Wl,--rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to `/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------

Build complete.
Don't forget to run 'make test'.

Installing shared extensions:     /usr/local/php/lib/php/extensions/no-debug-non-zts-20131226/
[root@ghzz exif]# vi /usr/local/php/etc/php.ini
##如果文件路径不存在,就去安装目录查找php.ini文件
查找:extension = 再最后一个extension= 后面添加上extension = “exif.so”
[root@ghzz ext]# grep -n  "exif.so" /usr/local/php/etc/php.ini 
743:extension = "exif.so"
[root@ghzz exif]# /etc/init.d/php-fpm restart   ##重启加载php模块

四、此时可能出现模块加载报错

Gracefully shutting down php-fpm . done
Starting php-fpm [06-Jan-2017 13:43:43] NOTICE: PHP message: PHP Warning: PHP Startup: Invalid library (maybe not a PHP library) ‘fileinfo.so’ in Unknown on line 0
重新执行上面的操作还是一直报这个错误

解决方法

 到你的模块安装目录,我这里是:

cd  /****/soft/lnmp1.2-full/src/php-5.6.14/ext/exif
make clean

在重新执行上面的全部命令,安装就成功了

报错原因:

因为之前编译的库文件.so存在异常,所以没有将新的写入,有冲突,需要清空后重新编译,即可启动

五、检查模块运行情况及效果

[root@ghzz ext]# php -m|grep exif
exif


向AI问一下细节

免责声明:本站发布的内容(图片、视频和文字)以原创、转载和分享为主,文章观点不代表本网站立场,如果涉及侵权请联系站长邮箱:is@yisu.com进行举报,并提供相关证据,一经查实,将立刻删除涉嫌侵权内容。

AI