温馨提示×

温馨提示×

您好,登录后才能下订单哦!

密码登录×
登录注册×
其他方式登录
点击 登录注册 即表示同意《亿速云用户服务条款》

Haproxy 实现部分域名使用https,其他域名正常使用

发布时间:2020-02-27 00:12:56 来源:网络 阅读:348 作者:kesungang 栏目:系统运维

要求:

1、Haproxy必须是需要1.5以上的版本才会支持ssl证书
2、要使用ssl模块,必须要安装openssl软件,版本要注意符合要求

openssl的安装

tar zxf openssl-0.9.8zh.tar.gz
cd openssl-0.9.8zh
./config enable-tlsext --prefix=/usr/local/openssl  no-shared
make && make install_sw
#以上安装不影响系统中的openssl版本,主要就是打开openssl的TLS SNI功能
也可以通过yum的方式去安装openssl

Haproxy的安装配置

这里可以使用yum的方式安装,也可以下载二进制包安装:安装方便百度就可以

Haproxy的配置文件

global
        log 127.0.0.1   local0
        log 127.0.0.1   local1 notice
        #log loghost    local0 info
        maxconn 20480
        uid 99
        gid 99
        #daemon
        tune.ssl.default-dh-param 2048
        debug
        #quiet
        #pidfile /usr/local/haproxy/run/haproxy.pid
        #nbproc 2 
defaults
        log     global
        mode    http
        option  httplog
        option  httpclose
        option  forwardfor
        option  dontlognull
        option  redispatch
        option  originalto
       #option  abortonclose
        balance roundrobin
       #balance leastconn
       #balance source

        stats refresh 30
        retries 3

        timeout connect 5000
        timeout client 2400000
        timeout server 2400000
        timeout check 5000
listen admin_status
       bind 0.0.0.0:81
       mode http
       log 127.0.0.1 local3 err
       stats refresh 30s
       stats uri /haproxy-stats
       stats realm Welcome CJWL \CJWL
       stats auth admin:wangguan
       stats hide-version
       stats admin if TRUE

 errorfile 403 /usr/local/haproxy/errorfiles/403.http
 errorfile 500 /usr/local/haproxy/errorfiles/500.http
 errorfile 502 /usr/local/haproxy/errorfiles/502.http
 errorfile 503 /usr/local/haproxy/errorfiles/503.http
 errorfile 504 /usr/local/haproxy/errorfiles/504.http
  frontend http_80_in
       bind 0.0.0.0:80,0.0.0.0:7070,0.0.0.0:7777
      #redirect scheme https if !{ ssl_fc }  把这行开启后,就表示所有http的访问都会自动走ssl证书,跳转走https
      # bind 0.0.0.0:4443 ssl crt /usr/local/haproxy/etc/ssl/haproxy.pem~~
       bind 0.0.0.0:443  ssl crt /etc/haproxy/ssl/server.pem
      #reqadd X-Forwarded-Proto:\ https  
acl testcoms_p    hdr_dom(host) -i testcoms.changjiu56.com
       acl ssl  hdr_reg(host) -i ^(kesungang.changjiu56.com)$
       redirect scheme https code 301 if !{ ssl_fc }  ssl
       acl kesungang_p  hdr_dom(host) -i kesungang.xxxx.com
       acl cpstest_p     hdr_dom(host) -i ^(cpstest.xxx.com)$
       acl recapicpstest_p     hdr_dom(host) -i ^(rec.api.cpstest.xxxx.com)$
       acl g7_ip         src 121.2xx.0.0/16 117.50.xxx.0/24

       use_backend testcoms.xxxx.com       if testcoms_p
       use_backend kesungang.xxxx.com       if kesungang_p
       use_backend bmwpdatest.xxxx.com     if bmwpdatest_p
       use_backend bmwpda.xxxx.com         if bmwpda_p
       use_backend srm.xxxx.com            if srm_p
       use_backend coms.xxx.com           if coms_p
#backend wmsims.xxxxx.com
#       mode http
#       balance source
#       option httpchk GET /test/test.html
#       server 10.0.3.111:80 10.0.3.111:80 maxconn 5000 check inter 2000 rise 2 fall 3
#       http-request set-header X-Forwarded-Port %[dst-Port]
#       http-request add-header X-Forwarded-Proto https if { ssl_fc }
backend kesungang.xxxx.com
        balance source
        #redirect scheme https if !{ ssl_fc }
        server 10.0.3.78:80 10.0.3.78:80 maxconn 1024 weight 3 check inter 2000 rise 2 fall 3

backend testcoms.xxxx.com
       balance source
       #option httpchk GET /HealthCheck.html
如果只让一个域名走ssl证书配置

1、在frontend 默认80里面把redirect scheme https if !{ ssl_fc }注释掉
2、配置acl规则如下
`acl ssl hdr_reg(host) -i ^(kesungang.xxx.com)$
redirect scheme https code 301 if !{ ssl_fc } ssl

acl kesungang_p hdr_dom(host) -i kesungang.xxxx.com
`

Haproxy 实现部分域名使用https,其他域名正常使用

多个域名,多个ssl证书配置

frontend http_server
bind :80
bind :443 ssl crt /etc/haproxy/keys/www.test.com.pem crt /etc/haproxy/keys/admin.test.com.pem crt /etc/haproxy/keys/passport.abc.com.pem
#按照如上规则如果多个站点就可以使用同样的规则 bind :443 ssl crt $filepath crt $file2path crt $file3path

    mode http

    acl ssl  hdr_reg(host) -i ^(www.test.com|admin.test.com|passport.abc.com)$
    redirect scheme https code 301 if !{ ssl_fc }  ssl
    #对以上站点进行https跳转
    #在某些情况下,在特定页面需要进行跳转,则
    acl ssl_site hdr_reg(host) -i ^(
    acl ssl_path path_beg -i /Login /Pay/Pay.aspx
    redirect scheme https code 301 if !{ ssl_fc }  ssl_site ssl_path
    redirect scheme http code 301 if { ssl_fc }  ssl_site !ssl_path
    #只在/loign /Pay/Pay.aspx页面进行跳转,其他页面使用http

    acl wwwtest_com hdr_reg(host) -i ^(www.test.com)$
    use_backend www_test_com if wwwtest_com { ssl_fc_sni www.test.com }
    #这里就是证书的对应部分,如
    acl admintest_com hdr_dom(host) -i admin.test.com
    use_backend admin_test_com if admintest_com { ssl_fc_sni admin.test.com } 
    acl passportabc_com hdr_dom(host) -i passport.abc.com
    use_backend pasport_abc_com if passport_abc_com { ssl_fc_sni passport.abc.com }

    backend www_test_com
        server test2 192.168.10.2:80 check port 80 inter 5000 rise 2 fall 3 weight 1
    backend admin_test_com
        server test4 192.168.10.4:80 check port 80 inter 5000 rise 2 fall 3 weight 1
    backend passport_abc_com
        server test5 192.168.10.5:80 check port 80 inter 5000 rise 2 fall 3 weight 1
向AI问一下细节

免责声明:本站发布的内容(图片、视频和文字)以原创、转载和分享为主,文章观点不代表本网站立场,如果涉及侵权请联系站长邮箱:is@yisu.com进行举报,并提供相关证据,一经查实,将立刻删除涉嫌侵权内容。

AI